河海大学学报(自然科学版)
河海大學學報(自然科學版)
하해대학학보(자연과학판)
JOURNAL OF HOHAI UNIVERSITY (NATURAL SCIENCES)
2014年
5期
451-454
,共4页
李建伟%钟苏%王治国%庞立军%贾伟
李建偉%鐘囌%王治國%龐立軍%賈偉
리건위%종소%왕치국%방립군%가위
蝶阀活门%水轮机结构裂纹%卡门涡%结构强度
蝶閥活門%水輪機結構裂紋%卡門渦%結構彊度
접벌활문%수륜궤결구렬문%잡문와%결구강도
butterfly valve%turbine structural crack%Karman vortices%structural strength
为探讨某电站水轮机进水管蝶阀活门筋板开裂的原因,利用ANSYS有限元软件,分别对蝶阀活门的强度及振动特性进行计算和分析。强度分析结果显示40 mm筋板位置的应力水平很低,筋板的开裂并非是应力过高造成的;蝶阀活门、筋板及盖板的模态分析表明,蝶阀活门的40 mm筋板及90 mm盖板出现了卡门涡。结合有限元分析结果,对电站蝶阀活门进行现场结构模态测试,测试结果与计算结果吻合。分析结果表明,该电站蝶阀活门出现的裂纹是由卡门涡引起的。
為探討某電站水輪機進水管蝶閥活門觔闆開裂的原因,利用ANSYS有限元軟件,分彆對蝶閥活門的彊度及振動特性進行計算和分析。彊度分析結果顯示40 mm觔闆位置的應力水平很低,觔闆的開裂併非是應力過高造成的;蝶閥活門、觔闆及蓋闆的模態分析錶明,蝶閥活門的40 mm觔闆及90 mm蓋闆齣現瞭卡門渦。結閤有限元分析結果,對電站蝶閥活門進行現場結構模態測試,測試結果與計算結果吻閤。分析結果錶明,該電站蝶閥活門齣現的裂紋是由卡門渦引起的。
위탐토모전참수륜궤진수관접벌활문근판개렬적원인,이용ANSYS유한원연건,분별대접벌활문적강도급진동특성진행계산화분석。강도분석결과현시40 mm근판위치적응력수평흔저,근판적개렬병비시응력과고조성적;접벌활문、근판급개판적모태분석표명,접벌활문적40 mm근판급90 mm개판출현료잡문와。결합유한원분석결과,대전참접벌활문진행현장결구모태측시,측시결과여계산결과문합。분석결과표명,해전참접벌활문출현적렬문시유잡문와인기적。
In order to explore the causes of the butterfly valve rib plate cracking of a turbine at a hydropower station, we calculated and anlayzed the strength and the vibration properties of the butterfly valve using the finite element software ANSYS. The strength analysis results show that the stress level of a 40-mm rib plate is very low. Obviously, high stress is not the reason for rib plate cracking. The results of modeling analysis show that the Karman vortices occurred at a 40-mm rib plate and a 90-mm cover plate. Referring to the results of FEM analysis, we conducted a site test for the butterfly valve at the hydropower station. The experimental results agreed with the calculated results. Hence, the cracks in the butterfly valve were caused by the Karman vortices.