CAJ | 학술논문

采用110 W 光纤耦合输出二极管激光器泵浦 Tm ∶YAP 晶体，测量了晶体热焦距与吸收泵浦功率的关系，依此设计了基波谐振腔，得到最高32 W 的2μm 基波输出。计算了2μm激光泵浦Ⅰ类相位匹配 ZGP-OPO 的相位匹配曲线，得到中波输出时的相位匹配角。用脉冲基波泵浦 ZGP-OPO，最高输出10.5 W 中波激光。测量了中波激光的光谱和光束质量，波长峰值分别是3.45μm 和4.8μm，光束质量因子 M2＝4.6。
채용110 W 광섬우합수출이겁관격광기빙포 Tm ∶YAP 정체，측량료정체열초거여흡수빙포공솔적관계，의차설계료기파해진강，득도최고32 W 적2μm 기파수출。계산료2μm격광빙포Ⅰ류상위필배 ZGP-OPO 적상위필배곡선，득도중파수출시적상위필배각。용맥충기파빙포 ZGP-OPO，최고수출10.5 W 중파격광。측량료중파격광적광보화광속질량，파장봉치분별시3.45μm 화4.8μm，광속질량인자 M2＝4.6。
A 110W fiber-coupled LD is used to pump the Tm:YAP crystal.The relation of thermal focal length and absorbed pump power is measured.According to the relation,the resonator of foundamental wave is designed,and a maximum output power of 32 W at a wavelength of 2 μm is obtained.The type Ⅰ phase-matching curve of ZGP-OPO that pumped by the laser at 2 μm is calculated,and the phase-matching angle is obtained when the ZGP-OPO gener-ates mid-infrared laser.The ZGP-OPO that is pumped by pulsed foundamental wave produces a maximum mid-infra-red output power of 10.5 W.The peak wavelength is 3.45 μm and 4.8 μm respectively,and the optical quality factor is 4.6.