当代化工
噹代化工
당대화공
CONTEMPORARY CHEMICAL INDUSTRY
2014年
9期
1683-1685
,共3页
张建%潘远凤%张家佳%杨贵涵
張建%潘遠鳳%張傢佳%楊貴涵
장건%반원봉%장가가%양귀함
浸渍法%热分解法%V2O5-WO3/TiO2催化剂%脱硝性能检测
浸漬法%熱分解法%V2O5-WO3/TiO2催化劑%脫硝性能檢測
침지법%열분해법%V2O5-WO3/TiO2최화제%탈초성능검측
Wet impregnation%Thermal decomposition method%V2O5-WO3/TiO2 catalysts%De-NOx test
以偏钛酸为原料通过浸渍法和固相物质的热分解法来制备以 NH3为还原剂选择性催化还原 NOx的催化剂V2O5-WO3/TiO2。着重考察催化剂组成、NH3/NO摩尔比和模拟烟气中O2浓度对催化剂脱硝性能的影响。催化剂的脱硝性能测试结果表明催化剂 V2O5(1.2%)-WO3(8.8%)/TiO2具有较高的催化活性和较宽的活性温度窗口,NO的转化率最高可达98.77%。综合考虑NH3逃逸、设备腐蚀和环境问题,NH3/NO摩尔比控制在1.2以内比较合适;富氧条件对脱硝催化反应的迚行更有利。
以偏鈦痠為原料通過浸漬法和固相物質的熱分解法來製備以 NH3為還原劑選擇性催化還原 NOx的催化劑V2O5-WO3/TiO2。著重攷察催化劑組成、NH3/NO摩爾比和模擬煙氣中O2濃度對催化劑脫硝性能的影響。催化劑的脫硝性能測試結果錶明催化劑 V2O5(1.2%)-WO3(8.8%)/TiO2具有較高的催化活性和較寬的活性溫度窗口,NO的轉化率最高可達98.77%。綜閤攷慮NH3逃逸、設備腐蝕和環境問題,NH3/NO摩爾比控製在1.2以內比較閤適;富氧條件對脫硝催化反應的迚行更有利。
이편태산위원료통과침지법화고상물질적열분해법래제비이 NH3위환원제선택성최화환원 NOx적최화제V2O5-WO3/TiO2。착중고찰최화제조성、NH3/NO마이비화모의연기중O2농도대최화제탈초성능적영향。최화제적탈초성능측시결과표명최화제 V2O5(1.2%)-WO3(8.8%)/TiO2구유교고적최화활성화교관적활성온도창구,NO적전화솔최고가체98.77%。종합고필NH3도일、설비부식화배경문제,NH3/NO마이비공제재1.2이내비교합괄;부양조건대탈초최화반응적중행경유리。
The V2O5-WO3/TiO2 catalyst was prepared from metatitanic acid by the methods of wet impregnation and thermal decomposition of solid material for selective catalytic reduction (SCR) of NOx with NH3. Effects of catalyst composition, mole ratio of NH3 to NO, and O2 concentration in simulated flue gas on De-NOx performance of the catalyst were investigated. Moreover, the results of De-NOx tests demonstrate that V2O5(1.2%)-WO3(8.8%)/TiO2 catalyst has high catalytic activity and broad activity temperature window, and the NO conversion reaches 98.77%. Considering the NH3 escape, equipment corrosion and environmental issues, it’s suitable to control the molar ratio of NH3/NO within 1.2. De-NOx catalytic reaction is more favorable in oxygen-rich conditions.