机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2014年
10期
155-162
,共8页
顾昊翔%李敏霞%王凯建%马一太
顧昊翔%李敏霞%王凱建%馬一太
고호상%리민하%왕개건%마일태
超临界%CO2%微通道%气体冷却器%优化
超臨界%CO2%微通道%氣體冷卻器%優化
초림계%CO2%미통도%기체냉각기%우화
supercritical%carbon dioxide%microchannels%gas cooler%optimization
以自然工质CO2作为研究对象,对超临界CO2层积式微通道气体冷却器进行研究.在试验研究中,通过改变高压压力和冷却水流量,得到不同工况下的换热量与传热系数,发现换热量随水流量增加而增加,制热能效比(Coefficient of performance,COP)随冷却高压升高而降低.换热器总传热系数可以达到700 W/(m2·K),总换热量可达9 kW.理论分析得出了降低制冷剂测出口温度有利于提升水侧出口温度和COP,故利用有限体积法与TDMA方法结合编制模拟程序,选用合适的换热关联式对微通道气体冷却器进行优化.研究发现增加通道长、水侧水力直径和通道排数,减小通道间距,都能提高水的出水温度,并得到最优结构使出水温度达到60℃以上.
以自然工質CO2作為研究對象,對超臨界CO2層積式微通道氣體冷卻器進行研究.在試驗研究中,通過改變高壓壓力和冷卻水流量,得到不同工況下的換熱量與傳熱繫數,髮現換熱量隨水流量增加而增加,製熱能效比(Coefficient of performance,COP)隨冷卻高壓升高而降低.換熱器總傳熱繫數可以達到700 W/(m2·K),總換熱量可達9 kW.理論分析得齣瞭降低製冷劑測齣口溫度有利于提升水側齣口溫度和COP,故利用有限體積法與TDMA方法結閤編製模擬程序,選用閤適的換熱關聯式對微通道氣體冷卻器進行優化.研究髮現增加通道長、水側水力直徑和通道排數,減小通道間距,都能提高水的齣水溫度,併得到最優結構使齣水溫度達到60℃以上.
이자연공질CO2작위연구대상,대초림계CO2층적식미통도기체냉각기진행연구.재시험연구중,통과개변고압압력화냉각수류량,득도불동공황하적환열량여전열계수,발현환열량수수류량증가이증가,제열능효비(Coefficient of performance,COP)수냉각고압승고이강저.환열기총전열계수가이체도700 W/(m2·K),총환열량가체9 kW.이론분석득출료강저제랭제측출구온도유리우제승수측출구온도화COP,고이용유한체적법여TDMA방법결합편제모의정서,선용합괄적환열관련식대미통도기체냉각기진행우화.연구발현증가통도장、수측수력직경화통도배수,감소통도간거,도능제고수적출수온도,병득도최우결구사출수온도체도60℃이상.