粘接
粘接
점접
2014年
6期
66-69,82
,共5页
乙烯基硅油改性%粘合剂%印花%表征
乙烯基硅油改性%粘閤劑%印花%錶徵
을희기규유개성%점합제%인화%표정
vinyl silicone oil modified%binder%printing%characterization
采用丙烯酸酯单体制备苯丙乳液粘合剂，用乙烯基硅油对其进行改性。探讨了乙烯基硅油的用量对乳液性能、胶膜性能的影响，及硅油改性粘合剂的用量对棉织物印花性能的影响。对改性粘合剂进行了红外光谱、热重分析、透射电镜等表征。结果表明，乙烯基硅油用量为9%时，乳液外观、胶膜及印花性能较好；乙烯基硅油改性粘合剂用量为6%时，印花织物的手感柔软、摩擦牢度较好。
採用丙烯痠酯單體製備苯丙乳液粘閤劑，用乙烯基硅油對其進行改性。探討瞭乙烯基硅油的用量對乳液性能、膠膜性能的影響，及硅油改性粘閤劑的用量對棉織物印花性能的影響。對改性粘閤劑進行瞭紅外光譜、熱重分析、透射電鏡等錶徵。結果錶明，乙烯基硅油用量為9%時，乳液外觀、膠膜及印花性能較好；乙烯基硅油改性粘閤劑用量為6%時，印花織物的手感柔軟、摩抆牢度較好。
채용병희산지단체제비분병유액점합제，용을희기규유대기진행개성。탐토료을희기규유적용량대유액성능、효막성능적영향，급규유개성점합제적용량대면직물인화성능적영향。대개성점합제진행료홍외광보、열중분석、투사전경등표정。결과표명，을희기규유용량위9%시，유액외관、효막급인화성능교호；을희기규유개성점합제용량위6%시，인화직물적수감유연、마찰뇌도교호。
The styrene acrylic emulsion binder was prepared with acrylate monomers and modified with vinyl silicone oil. The experiments explored the effect of vinyl silicone oil dosage on the properties of emulsion and emulsion film, and the effect of silicone modified binder on the printing properties of cotton fabrics.The modified binder was characterized by infrared spectrometry, thermo-gravimetric analysis, transmission electron microscopy.The results showed that when the amount of vinyl silicone oil is 9%, the emulsion appearance and the film performance are good;when the vinyl silicone oil modified binder amount is 6%,the printing fabric has a soft handfeel and the rubbing fastness is good.
