世界科学技术-中医药现代化
世界科學技術-中醫藥現代化
세계과학기술-중의약현대화
WORLD SCIENCE AND TECHNOLOGY-MODERNIZATION OF TRADITIONAL CHINESE MEDICINE
2014年
3期
671-674
,共4页
速溶阿胶%喷雾干燥%单因素%正交试验%HPLC法
速溶阿膠%噴霧榦燥%單因素%正交試驗%HPLC法
속용아효%분무간조%단인소%정교시험%HPLC법
Instant Asini Corii Colla%spray drying technology%single factor%orthogonal test%HPLC method
目的：研究速溶阿胶的喷雾干燥工艺。方法：采用HPLC法，以速溶阿胶中4种氨基酸含量和收粉率作为评价指标，采用单因素考察与正交试验相结合的方法对喷雾干工艺参数进行优选。结果：速溶阿胶的最佳喷雾干燥为阿胶烊化至相对密度为1.10（60℃下测定），并在药液中加入40%β-环糊精，进口温度165℃，压缩空气流量为45 L·h-1，供液速度为15%。结论：该工艺合理可靠，为工业化生产提供一定参考。
目的：研究速溶阿膠的噴霧榦燥工藝。方法：採用HPLC法，以速溶阿膠中4種氨基痠含量和收粉率作為評價指標，採用單因素攷察與正交試驗相結閤的方法對噴霧榦工藝參數進行優選。結果：速溶阿膠的最佳噴霧榦燥為阿膠烊化至相對密度為1.10（60℃下測定），併在藥液中加入40%β-環糊精，進口溫度165℃，壓縮空氣流量為45 L·h-1，供液速度為15%。結論：該工藝閤理可靠，為工業化生產提供一定參攷。
목적：연구속용아효적분무간조공예。방법：채용HPLC법，이속용아효중4충안기산함량화수분솔작위평개지표，채용단인소고찰여정교시험상결합적방법대분무간공예삼수진행우선。결과：속용아효적최가분무간조위아효양화지상대밀도위1.10（60℃하측정），병재약액중가입40%β-배호정，진구온도165℃，압축공기류량위45 L·h-1，공액속도위15%。결론：해공예합리가고，위공업화생산제공일정삼고。
This article was aimed to research the spray drying technology of instant Asini Corii Colla. HPLC was used. Contents of four kinds of amino acid and collection rate of powder were used as the indexes. The single factor experiment and orthogonal test were combined in the optimization of process conditions. The results showed that the best technology of spray drying technology was medicine liquid density of 1.10 (determined under the temperature of 60℃), inlet air temperature at 165℃, the pressed air speed was 45 L·h-1, the fluid speed was 15%. It was conclud-ed that the technology was reasonable and reliable, which can provide certain reference in the industrial production.
