有色矿冶
有色礦冶
유색광야
NON-FEROUS MINING AND METALLURGY
2014年
2期
70-71,74
,共3页
变形控制%拉筋%内应力
變形控製%拉觔%內應力
변형공제%랍근%내응력
control the deformation%stretch%internal stress
以对开齿轮生产过程中存在的缺点为切入点，从齿轮生产的方法入手，详细的分析了对开齿轮各环节上变形产生的原因，并根据多年齿轮生产的实际经验系统地阐述了各工序消除内应力的关键点，达到了提高效率，降低成本的目的，有效地解决了对开齿轮工艺过程中变形的难题，对对开齿轮的实际生产及应用起到了非常好的指导作用。
以對開齒輪生產過程中存在的缺點為切入點，從齒輪生產的方法入手，詳細的分析瞭對開齒輪各環節上變形產生的原因，併根據多年齒輪生產的實際經驗繫統地闡述瞭各工序消除內應力的關鍵點，達到瞭提高效率，降低成本的目的，有效地解決瞭對開齒輪工藝過程中變形的難題，對對開齒輪的實際生產及應用起到瞭非常好的指導作用。
이대개치륜생산과정중존재적결점위절입점，종치륜생산적방법입수，상세적분석료대개치륜각배절상변형산생적원인，병근거다년치륜생산적실제경험계통지천술료각공서소제내응력적관건점，체도료제고효솔，강저성본적목적，유효지해결료대개치륜공예과정중변형적난제，대대개치륜적실제생산급응용기도료비상호적지도작용。
Based on the issues during the w hole process of girth gear milling , the thesis analyzed the possi-ble reasons of deformation and discussed the key holding points according to the practical experiences . With the scientific researching , the issues of deformation during the girth gear milling have been solved , the efficiency has been increased , the cost has been decreased as well . The thesis has been qualified in-struction for the actual process of girth gear milling .
