现代化工
現代化工
현대화공
MODERN CHEMICAL INDUSTRY
2012年
11期
52-54
,共3页
王宏力%薄新党%杨晓刚%范少文
王宏力%薄新黨%楊曉剛%範少文
왕굉력%박신당%양효강%범소문
ClO2%UV%催化氧化%酚醛废水%COD去除率
ClO2%UV%催化氧化%酚醛廢水%COD去除率
ClO2%UV%최화양화%분철폐수%COD거제솔
以ClO2/UV工艺对酚醛废水进行催化氧化降解,考察ClO2加入量、初始溶液pH、催化剂投加量、紫外照射时间等因素对废水处理效果的影响,确定适宜催化氧化反应工艺条件.实验结果表明,在250 mL酚醛废水中,ClO2溶液加入量为35mL,催化剂投加量为3 g,废水初始pH为2,反应时间为40 min时,处理效果较高,苯酚、COD去除率分别为86.87%和71.83%.UV的引入有利于废水的降解,在UV/ClO2联合工艺条件下,反应50 min,苯酚、COD去除率分别达到92.07%和84.46%.
以ClO2/UV工藝對酚醛廢水進行催化氧化降解,攷察ClO2加入量、初始溶液pH、催化劑投加量、紫外照射時間等因素對廢水處理效果的影響,確定適宜催化氧化反應工藝條件.實驗結果錶明,在250 mL酚醛廢水中,ClO2溶液加入量為35mL,催化劑投加量為3 g,廢水初始pH為2,反應時間為40 min時,處理效果較高,苯酚、COD去除率分彆為86.87%和71.83%.UV的引入有利于廢水的降解,在UV/ClO2聯閤工藝條件下,反應50 min,苯酚、COD去除率分彆達到92.07%和84.46%.
이ClO2/UV공예대분철폐수진행최화양화강해,고찰ClO2가입량、초시용액pH、최화제투가량、자외조사시간등인소대폐수처리효과적영향,학정괄의최화양화반응공예조건.실험결과표명,재250 mL분철폐수중,ClO2용액가입량위35mL,최화제투가량위3 g,폐수초시pH위2,반응시간위40 min시,처리효과교고,분분、COD거제솔분별위86.87%화71.83%.UV적인입유리우폐수적강해,재UV/ClO2연합공예조건하,반응50 min,분분、COD거제솔분별체도92.07%화84.46%.