邵阳学院学报(自然科学版)
邵暘學院學報(自然科學版)
소양학원학보(자연과학판)
JOURNAL OF SHAOYANG UNIVERSITY(NATURAL SCIENCE)
2014年
2期
25-30
,共6页
张桂菊%肖才远%谭青%莫有瑜%李恒春
張桂菊%肖纔遠%譚青%莫有瑜%李恆春
장계국%초재원%담청%막유유%리항춘
液压挖掘机%动臂%工作装置%有限元分析%ANSYS
液壓挖掘機%動臂%工作裝置%有限元分析%ANSYS
액압알굴궤%동비%공작장치%유한원분석%ANSYS
hydraulic excavator%boom%working device%finite element analysis%ANSYS
针对YC225 LC-8型液压反铲挖掘机,利用力学理论和方法对其工作装置在三种典型工况下进行受力分析。使用ANSYS对挖掘机动臂进行有限元静力强度分析,得出三种典型工况下的应力和应变云图以校核其强度。有限元分析结果显示:挖掘机动臂的静强度满足要求,其最大应力主要出现在液压缸和动臂连接的铰接点以及动臂和底座的铰接点处,这是对工作装置的强度起控制作用的一个重要因素。有限元分析结果对设计优化工作装置的具指导作用。
針對YC225 LC-8型液壓反鏟挖掘機,利用力學理論和方法對其工作裝置在三種典型工況下進行受力分析。使用ANSYS對挖掘機動臂進行有限元靜力彊度分析,得齣三種典型工況下的應力和應變雲圖以校覈其彊度。有限元分析結果顯示:挖掘機動臂的靜彊度滿足要求,其最大應力主要齣現在液壓缸和動臂連接的鉸接點以及動臂和底座的鉸接點處,這是對工作裝置的彊度起控製作用的一箇重要因素。有限元分析結果對設計優化工作裝置的具指導作用。
침대YC225 LC-8형액압반산알굴궤,이용역학이론화방법대기공작장치재삼충전형공황하진행수력분석。사용ANSYS대알굴궤동비진행유한원정력강도분석,득출삼충전형공황하적응력화응변운도이교핵기강도。유한원분석결과현시:알굴궤동비적정강도만족요구,기최대응력주요출현재액압항화동비련접적교접점이급동비화저좌적교접점처,저시대공작장치적강도기공제작용적일개중요인소。유한원분석결과대설계우화공작장치적구지도작용。
Based on the type of YC225LC-8 hydraulic backhoe excavator and used the mechanics theory method,the stress a-nalysis of its working device was carried out under three typical working conditions. The excavator boom's static strength analysis has been done by using finite element analysis software ANSYS,and then stress and strain nephogram of three typical conditions were calculated out,which can check the strength. The results of finite element analysis showed that:boom's static intensity can meet the requirements of static strength,the maximum stress occurs mainly in the boom cylinder and a movable arm hinge point and the boom and the base joint,which plays an important role for controlling factor for working device. The study results are of significance for the optimization design of the working device.