电力系统保护与控制
電力繫統保護與控製
전력계통보호여공제
POWER SYSTM PROTECTION AND CONTROL
2014年
12期
37-43
,共7页
光伏阵列%最大功率点跟踪%直流微电网%恒压模式%恒功率模式
光伏陣列%最大功率點跟蹤%直流微電網%恆壓模式%恆功率模式
광복진렬%최대공솔점근종%직류미전망%항압모식%항공솔모식
photovoltaic array%MPPT%DC microgrid%constant voltage mode%constant power mode
对接入直流微电网的光伏发电系统提出三种工作模式,即最大功率点跟踪控制模式、恒压模式和恒功率模式。在最大功率点跟踪控制模式时,采用一种变步长的扰动观察法实现最大功率点跟踪。在恒压模式时,采用 PI 控制实现恒压控制。在恒功率模式时,采用PI控制实现恒功率控制。当判断出不能实现恒压或恒功率控制时,切换到最大功率点跟踪控制模式,并通知能量管理器,能量管理器通过储能装置调度或负荷调度来镇定直流母线电压。从而使光伏发电系统对能量管理器来说是一个受限的可控源,有助于直流微电网的稳定运行。对所提出的多种工作模式及控制方法进行了仿真,结果表明,所提方法能使光伏发电系统运行于多种工作模式,并能实现相应的控制目标及模式切换,使光伏发电系统变为一个受限的可控源。
對接入直流微電網的光伏髮電繫統提齣三種工作模式,即最大功率點跟蹤控製模式、恆壓模式和恆功率模式。在最大功率點跟蹤控製模式時,採用一種變步長的擾動觀察法實現最大功率點跟蹤。在恆壓模式時,採用 PI 控製實現恆壓控製。在恆功率模式時,採用PI控製實現恆功率控製。噹判斷齣不能實現恆壓或恆功率控製時,切換到最大功率點跟蹤控製模式,併通知能量管理器,能量管理器通過儲能裝置調度或負荷調度來鎮定直流母線電壓。從而使光伏髮電繫統對能量管理器來說是一箇受限的可控源,有助于直流微電網的穩定運行。對所提齣的多種工作模式及控製方法進行瞭倣真,結果錶明,所提方法能使光伏髮電繫統運行于多種工作模式,併能實現相應的控製目標及模式切換,使光伏髮電繫統變為一箇受限的可控源。
대접입직류미전망적광복발전계통제출삼충공작모식,즉최대공솔점근종공제모식、항압모식화항공솔모식。재최대공솔점근종공제모식시,채용일충변보장적우동관찰법실현최대공솔점근종。재항압모식시,채용 PI 공제실현항압공제。재항공솔모식시,채용PI공제실현항공솔공제。당판단출불능실현항압혹항공솔공제시,절환도최대공솔점근종공제모식,병통지능량관리기,능량관리기통과저능장치조도혹부하조도래진정직류모선전압。종이사광복발전계통대능량관리기래설시일개수한적가공원,유조우직류미전망적은정운행。대소제출적다충공작모식급공제방법진행료방진,결과표명,소제방법능사광복발전계통운행우다충공작모식,병능실현상응적공제목표급모식절환,사광복발전계통변위일개수한적가공원。
Three operating modes are presented for photovoltaic (PV) generation systems connected to DC microgrid, including the maximum power point tracking (MPPT) control mode, constant voltage mode and constant power mode. A variable step size perturbation and observation method is used to achieve maximum power tracking in the MPPT control mode. The constant voltage control is achieved by the PI control method in the constant voltage mode. The constant power control is achieved by the PI control method in the constant power mode. When the constant voltage or constant power can not be realized, the operating mode is switched to the MPPT control mode and the energy manager is notified. The DC bus voltage is stabilized by the energy storage device dispatch or the load dispatch. So that the PV generation system is a controllable source of limited to the energy manager and is contributed to the stable operation of the DC microgrid. The multimode and control methods are simulated, and the results show that the PV generation system can operate in multimode, and the control objectives and mode switching can be achieved. Therefore, the PV generation system is changed into a controllable source of limited.