制冷
製冷
제랭
REFRIGERATION
2013年
3期
86-89
,共4页
穆江勃%卢菡涵%刘志奇%闫献国%徐昌贵
穆江勃%盧菡涵%劉誌奇%閆獻國%徐昌貴
목강발%로함함%류지기%염헌국%서창귀
半导体制冷%医用恒温箱%温度控制
半導體製冷%醫用恆溫箱%溫度控製
반도체제랭%의용항온상%온도공제
Semiconductor Refrigeration%Medical Oven%Temperature Control
医用恒温箱主要用于药品、试剂的储存，血液的冷藏保温等，它需要一个低温的恒温环境。本文以血液存储为背景，基于半导体制冷原理设计加工出一个医用恒温箱。首先用三维软件Solidworks 设计出箱体的三维模型，以此为依据加工出实体，然后采用继电器开关控制进行温度的恒温控制，进行实验验证，结果表明所设计的半导体制冷恒温箱，能够满足血液存储的恒温要求。
醫用恆溫箱主要用于藥品、試劑的儲存，血液的冷藏保溫等，它需要一箇低溫的恆溫環境。本文以血液存儲為揹景，基于半導體製冷原理設計加工齣一箇醫用恆溫箱。首先用三維軟件Solidworks 設計齣箱體的三維模型，以此為依據加工齣實體，然後採用繼電器開關控製進行溫度的恆溫控製，進行實驗驗證，結果錶明所設計的半導體製冷恆溫箱，能夠滿足血液存儲的恆溫要求。
의용항온상주요용우약품、시제적저존，혈액적랭장보온등，타수요일개저온적항온배경。본문이혈액존저위배경，기우반도체제랭원리설계가공출일개의용항온상。수선용삼유연건Solidworks 설계출상체적삼유모형，이차위의거가공출실체，연후채용계전기개관공제진행온도적항온공제，진행실험험증，결과표명소설계적반도체제랭항온상，능구만족혈액존저적항온요구。
Medical oven is mainly used for storing drugs , reagents and blood Refrigerating etc.it requires a cryo-genic temperature environment.In this paper , in order to make a better Blood storage , we designed and processed a medical incubator based on the principles of semiconductor refrigeration.At the beginning, 3D software Solidworks is used for designing three -dimensional model of the box , based on which we processed the entity , and then rela-ying switch control method designed the temperature control system , and finally experimental verification.The re-sults show that the semiconductor cooling thermostat designed could meet the blood storage requirements for constant temperature.
