光学精密工程
光學精密工程
광학정밀공정
OPTICS AND PRECISION ENGINEERING
2012年
12期
2654-2660
,共7页
激光散射%动态散斑%旋转圆柱%粗糙目标%功率谱%带宽
激光散射%動態散斑%鏇轉圓柱%粗糙目標%功率譜%帶寬
격광산사%동태산반%선전원주%조조목표%공솔보%대관
建立了圆柱旋转激光散斑功率谱的理论模型以实现粗糙目标光学无损测量的方法.首先,根据粗糙面激光散射特征,研究了平行光束照射匀速旋转的圆柱表面时其反射空间形成的动态散斑特性,给出了接收场散斑强度起伏互相关函数及其功率谱密度函数的理论模型,以及动态散斑场的相干长度和接收信号带宽.接着,分析了旋转引起的散斑平移和散斑沸腾对接收信号带宽的影响.最后,测量了旋转圆柱准镜向及漫射部分的散斑图像.结果显示:当0.633 μm入射光波照射半径为1 mm的圆柱时,频率为10 Hz的旋转圆柱自相关函数的相关时间约为4 ms,而20 Hz的旋转圆柱自相关函数对应的相关时间为2 ms左右.结果表明,在动态散斑场中,多普勒效应和散斑平移效应引起的带宽约为同一个量级,而散斑沸腾效应可以忽略.
建立瞭圓柱鏇轉激光散斑功率譜的理論模型以實現粗糙目標光學無損測量的方法.首先,根據粗糙麵激光散射特徵,研究瞭平行光束照射勻速鏇轉的圓柱錶麵時其反射空間形成的動態散斑特性,給齣瞭接收場散斑彊度起伏互相關函數及其功率譜密度函數的理論模型,以及動態散斑場的相榦長度和接收信號帶寬.接著,分析瞭鏇轉引起的散斑平移和散斑沸騰對接收信號帶寬的影響.最後,測量瞭鏇轉圓柱準鏡嚮及漫射部分的散斑圖像.結果顯示:噹0.633 μm入射光波照射半徑為1 mm的圓柱時,頻率為10 Hz的鏇轉圓柱自相關函數的相關時間約為4 ms,而20 Hz的鏇轉圓柱自相關函數對應的相關時間為2 ms左右.結果錶明,在動態散斑場中,多普勒效應和散斑平移效應引起的帶寬約為同一箇量級,而散斑沸騰效應可以忽略.
건립료원주선전격광산반공솔보적이론모형이실현조조목표광학무손측량적방법.수선,근거조조면격광산사특정,연구료평행광속조사균속선전적원주표면시기반사공간형성적동태산반특성,급출료접수장산반강도기복호상관함수급기공솔보밀도함수적이론모형,이급동태산반장적상간장도화접수신호대관.접착,분석료선전인기적산반평이화산반비등대접수신호대관적영향.최후,측량료선전원주준경향급만사부분적산반도상.결과현시:당0.633 μm입사광파조사반경위1 mm적원주시,빈솔위10 Hz적선전원주자상관함수적상관시간약위4 ms,이20 Hz적선전원주자상관함수대응적상관시간위2 ms좌우.결과표명,재동태산반장중,다보륵효응화산반평이효응인기적대관약위동일개량급,이산반비등효응가이홀략.