硅酸盐通报
硅痠鹽通報
규산염통보
BULLETIN OF THE CHINESE CERAMIC SOCIETY
2012年
6期
1576-1579
,共4页
Sr1-xEuxMoO4粉体%共沉淀%LEDs%发光
Sr1-xEuxMoO4粉體%共沉澱%LEDs%髮光
Sr1-xEuxMoO4분체%공침정%LEDs%발광
以Na2MoO4溶液为沉淀剂,采用共沉淀法制备了前驱体,在空气中经850~950℃煅烧,合成了Sr1-xEuxMoO4 粉体.利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、荧光光谱仪对样品的结构、形貌及发光性能进行了表征.探讨了其合成工艺条件,确定了最佳烧结温度850℃,烧结时间为3h,并确定了当x=0.30时样品的相对发光亮度达到最大值.红色荧光粉的激发峰分别位于394,464 nm,发射光谱中在591 nm和617 nm处有很强的发射峰,其中最强发射峰位于617 nm左右,与Eu3+的SD0→7F2跃迁对应,可用于LED,提高其显色指数.
以Na2MoO4溶液為沉澱劑,採用共沉澱法製備瞭前驅體,在空氣中經850~950℃煅燒,閤成瞭Sr1-xEuxMoO4 粉體.利用X射線衍射儀(XRD)、掃描電子顯微鏡(SEM)、熒光光譜儀對樣品的結構、形貌及髮光性能進行瞭錶徵.探討瞭其閤成工藝條件,確定瞭最佳燒結溫度850℃,燒結時間為3h,併確定瞭噹x=0.30時樣品的相對髮光亮度達到最大值.紅色熒光粉的激髮峰分彆位于394,464 nm,髮射光譜中在591 nm和617 nm處有很彊的髮射峰,其中最彊髮射峰位于617 nm左右,與Eu3+的SD0→7F2躍遷對應,可用于LED,提高其顯色指數.
이Na2MoO4용액위침정제,채용공침정법제비료전구체,재공기중경850~950℃단소,합성료Sr1-xEuxMoO4 분체.이용X사선연사의(XRD)、소묘전자현미경(SEM)、형광광보의대양품적결구、형모급발광성능진행료표정.탐토료기합성공예조건,학정료최가소결온도850℃,소결시간위3h,병학정료당x=0.30시양품적상대발광량도체도최대치.홍색형광분적격발봉분별위우394,464 nm,발사광보중재591 nm화617 nm처유흔강적발사봉,기중최강발사봉위우617 nm좌우,여Eu3+적SD0→7F2약천대응,가용우LED,제고기현색지수.