中国光学
中國光學
중국광학
CHINESE JOURNAL OF OPTICS
2012年
6期
602-609
,共8页
光学遥感器%离轴三反系统%热光学%有限元模型%调制传递函数
光學遙感器%離軸三反繫統%熱光學%有限元模型%調製傳遞函數
광학요감기%리축삼반계통%열광학%유한원모형%조제전체함수
optical remote sensor%off-axis three mirror system%thermal optics%finite element model%Modula-tion Transfer Function (MTF)
在离轴三反射系统热光学理论分析的基础上,利用热光学实验测试了光学系统在不同热环境下的成像质量。将实测温度代入有限元模型,计算表征镜面变形的Zernike系数。将Zernike系数输入光学设计软件,复算光学系统的理论成像质量,并与测试结果进行对比分析。结果显示,理论复算值与实验实测值相吻合,证明了理论分析的正确性。试验检测表明,系统在Nquist频率下,18℃时的静态传递函数为0.247;14~21℃时的静态传递函数为0.221~0.254,满足系统成像质量要求。
在離軸三反射繫統熱光學理論分析的基礎上,利用熱光學實驗測試瞭光學繫統在不同熱環境下的成像質量。將實測溫度代入有限元模型,計算錶徵鏡麵變形的Zernike繫數。將Zernike繫數輸入光學設計軟件,複算光學繫統的理論成像質量,併與測試結果進行對比分析。結果顯示,理論複算值與實驗實測值相吻閤,證明瞭理論分析的正確性。試驗檢測錶明,繫統在Nquist頻率下,18℃時的靜態傳遞函數為0.247;14~21℃時的靜態傳遞函數為0.221~0.254,滿足繫統成像質量要求。
재리축삼반사계통열광학이론분석적기출상,이용열광학실험측시료광학계통재불동열배경하적성상질량。장실측온도대입유한원모형,계산표정경면변형적Zernike계수。장Zernike계수수입광학설계연건,복산광학계통적이론성상질량,병여측시결과진행대비분석。결과현시,이론복산치여실험실측치상문합,증명료이론분석적정학성。시험검측표명,계통재Nquist빈솔하,18℃시적정태전체함수위0.247;14~21℃시적정태전체함수위0.221~0.254,만족계통성상질량요구。
On the basis of the theoretical thermal optical analysis of off-axis three-mirror systems, the image quality of a space remote sensing optical system in different thermal environments was tested by using a thermal optical experiment. After the actually measured temperature was input into finite element model, the surface aberrations of mirrors with temperature gradients were obtained using finite element analysis software, and the surfaces with aberrations were fitted with the Zernike Polynomials. Then, Zernike coefficients were input into the optical design software, and the imaging qualities of system with difference temperature gradients were ana- lyzed. Finally, the experimental results were compared. It shows that the theoretical analysis results are in a- greement with the measured results, proving that the analysis is correct. Measured Modulation Transfer Func- tions(MTF) at Nquist frequency are 0. 247 at 18 ℃ and 0. 221 -0. 254 between 14 -21 ℃ , which meet the requirement of image quality.