CAJ | 학술논문

CO2与原油接触时会发生传质现象直到两相组成相似,此时界面张力消失,即达到混相。最小混相压力（MMP）是CO2混相驱的重要参数之一,目前主要采用细管实验法来确定其大小,但该方法费时费力,而经验公式法又存在较大的局限性。利用PR状态方程确定了气、液达到平衡时的各组分组成,并结合混相函数计算出了此时的MMP值。实例表明：与经验公式法相比,由PR状态方程计算出的MMP值最接近细管实验值;混相函数的迭代精度对计算出的MMP值影响较大。
CO2여원유접촉시회발생전질현상직도량상조성상사,차시계면장력소실,즉체도혼상。최소혼상압력（MMP）시CO2혼상구적중요삼수지일,목전주요채용세관실험법래학정기대소,단해방법비시비력,이경험공식법우존재교대적국한성。이용PR상태방정학정료기、액체도평형시적각조분조성,병결합혼상함수계산출료차시적MMP치。실례표명：여경험공식법상비,유PR상태방정계산출적MMP치최접근세관실험치;혼상함수적질대정도대계산출적MMP치영향교대。
When carbon dioxide comes in contact with oil,the mass transfer phenomena occur.The compositions of two phases become similar,and the interfacial tension disappears,and then gas and oil form miscible.The minimum miscibility pressure(MMP) is an important parameter in CO2 injection process.There are manymethods for the determination ofMMP,and the slimtube test is the most widely used one.However,the experiments are time-consuming,and the empirical formula has great limitations.Thus the PR equation of state ofMMP determined for CO2 flooding is a good choice.The composition of each component could be determined by the PR equation of state when the gas-liquid phase achieves balance.MMP could be calculated by using the miscibility function.The result shows that the MMP determined by PR equation of state is more accurate than that by empirical equations.The iterative precision of the miscibility function has a significant impact on the result.