CAJ | 학술논문

针对提高嵌入式系统的开发效率、减少系统开发时间和降低重复工作等问题,提出基于K60动态配置通用测控系统方案。首先,采用构件化设计思想和组态软件设计思想,将系统设计成不针对具体应用的硬件可裁减、软件可配置的通用型测控系统。其次,将系统的配置参数通过修改LCF链接文件定义成Flash变量,存储在可指定的Flash参数扇区中,可单独动态在线擦写参数区而不影响其他部分。最后,将此方案成功地应用到温室大棚环境测控系统中。实践结果表明,可配置的通用型测控系统方案具可行性和高效性。
침대제고감입식계통적개발효솔、감소계통개발시간화강저중복공작등문제,제출기우K60동태배치통용측공계통방안。수선,채용구건화설계사상화조태연건설계사상,장계통설계성불침대구체응용적경건가재감、연건가배치적통용형측공계통。기차,장계통적배치삼수통과수개LCF련접문건정의성Flash변량,존저재가지정적Flash삼수선구중,가단독동태재선찰사삼수구이불영향기타부분。최후,장차방안성공지응용도온실대붕배경측공계통중。실천결과표명,가배치적통용형측공계통방안구가행성화고효성。
In order to improve the development efficiency of embedded system and reduce system development time and duplication of work and other issues,we proposed a method to dynamically configure generic measurement and control system based on K60 program.First,according to the theories of configuration software and component,we designed a general-purpose measurement and control system that can be cut for application-specific hardware and be configurable for software.Second,the configuration parameters of the system was defined by modifying the LCF linked file into Flash variables,stored in the parameters specified Flash sector,parameters area can be flashed online individually without affecting other parts.Finally,this program was successfully applied to the greenhouse environment monitoring and control system.The practical results showed the feasibility and efficiency of universal monitoring and control system that can be configured.