广州化工
廣州化工
엄주화공
GUANGZHOU CHEMICAL INDUSTRY AND TECHNOLOGY
2012年
22期
88-89,132
,共3页
电吸附%石墨电极%硝酸根
電吸附%石墨電極%硝痠根
전흡부%석묵전겁%초산근
electrosorb%graphite electrode%nitrate
采用电吸附法用于高盐废水的脱盐。石墨板做电极,研究工作电压、流量、浓度对硝酸根去除的影响。实验表明：当工作电压为1.8 V,电流为0.05 A,电极为4对,流量为40 mL/min时,硝态氮的去除率可达52.2%。
採用電吸附法用于高鹽廢水的脫鹽。石墨闆做電極,研究工作電壓、流量、濃度對硝痠根去除的影響。實驗錶明：噹工作電壓為1.8 V,電流為0.05 A,電極為4對,流量為40 mL/min時,硝態氮的去除率可達52.2%。
채용전흡부법용우고염폐수적탈염。석묵판주전겁,연구공작전압、류량、농도대초산근거제적영향。실험표명：당공작전압위1.8 V,전류위0.05 A,전겁위4대,류량위40 mL/min시,초태담적거제솔가체52.2%。
An electro-adsorption method was used to treat the high salt water.The electrode was graphite plate,and the influences of voltage,flow rate and concentration on the removal effect of nitrate ion were studied.The results showed that when the voltage was 1.8 V,the electric current was 0.05 A,electrode were 4 pairs,flow rate was 40 mL/min,and the removal effect of nitrate ion can reach to 52.2%.
