华南理工大学学报(自然科学版)
華南理工大學學報(自然科學版)
화남리공대학학보(자연과학판)
JOURNAL OF SOUTH CHINA UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION)
2013年
2期
123-128
,共6页
梁银杏%郭鹏%任碧野%童真
樑銀杏%郭鵬%任碧野%童真
량은행%곽붕%임벽야%동진
MQ硅树脂%室温硫化%硅橡胶%补强
MQ硅樹脂%室溫硫化%硅橡膠%補彊
MQ규수지%실온류화%규상효%보강
以六甲基二硅氧烷、1,3-二乙烯基-1,1,3,3-四甲基二硅氧烷和正硅酸乙酯为原料,通过水解缩合反应制备了乙烯基MQ硅树脂(M为R3SiO1/2,Q为SiO4/2),考察了聚合条件对产物性能的影响.以该MQ硅树脂为填料,端乙烯基聚二甲基硅氧烷(PVMS)为基础聚合物,聚甲基氢硅氧烷为交联剂,在铂催化剂催化下硫化成型,获得乙烯基MQ硅树脂增强的加成型室温硫化(RTV)硅橡胶,探讨了制备工艺对硫化硅橡胶力学性能和透明性的影响.结果表明:当盐酸浓度为4.0%、乙醇浓度为1.6%、M/Q摩尔比为0.75时,所制得的MQ硅树脂的补强效果较好;当PVMS/MQ硅树脂质量比为1,Si-H和Si-Vi摩尔比为1.4、催化剂含量为10μg/g、抑制剂含量为0.3 mg/g时,所制得的硫化硅橡胶的拉伸强度可达7.2 MPa,并具有很好的透明性,说明MQ硅树脂的增强作用明显.
以六甲基二硅氧烷、1,3-二乙烯基-1,1,3,3-四甲基二硅氧烷和正硅痠乙酯為原料,通過水解縮閤反應製備瞭乙烯基MQ硅樹脂(M為R3SiO1/2,Q為SiO4/2),攷察瞭聚閤條件對產物性能的影響.以該MQ硅樹脂為填料,耑乙烯基聚二甲基硅氧烷(PVMS)為基礎聚閤物,聚甲基氫硅氧烷為交聯劑,在鉑催化劑催化下硫化成型,穫得乙烯基MQ硅樹脂增彊的加成型室溫硫化(RTV)硅橡膠,探討瞭製備工藝對硫化硅橡膠力學性能和透明性的影響.結果錶明:噹鹽痠濃度為4.0%、乙醇濃度為1.6%、M/Q摩爾比為0.75時,所製得的MQ硅樹脂的補彊效果較好;噹PVMS/MQ硅樹脂質量比為1,Si-H和Si-Vi摩爾比為1.4、催化劑含量為10μg/g、抑製劑含量為0.3 mg/g時,所製得的硫化硅橡膠的拉伸彊度可達7.2 MPa,併具有很好的透明性,說明MQ硅樹脂的增彊作用明顯.
이륙갑기이규양완、1,3-이을희기-1,1,3,3-사갑기이규양완화정규산을지위원료,통과수해축합반응제비료을희기MQ규수지(M위R3SiO1/2,Q위SiO4/2),고찰료취합조건대산물성능적영향.이해MQ규수지위전료,단을희기취이갑기규양완(PVMS)위기출취합물,취갑기경규양완위교련제,재박최화제최화하류화성형,획득을희기MQ규수지증강적가성형실온류화(RTV)규상효,탐토료제비공예대류화규상효역학성능화투명성적영향.결과표명:당염산농도위4.0%、을순농도위1.6%、M/Q마이비위0.75시,소제득적MQ규수지적보강효과교호;당PVMS/MQ규수지질량비위1,Si-H화Si-Vi마이비위1.4、최화제함량위10μg/g、억제제함량위0.3 mg/g시,소제득적류화규상효적랍신강도가체7.2 MPa,병구유흔호적투명성,설명MQ규수지적증강작용명현.