CAJ | 학술논문

借助于计算流体动力学软件POLYFLOW,基于电磁动态塑化理论建立了销钉混炼元件和单螺杆混炼元件的简化几何模型,并对其进行数值模拟仿真,对比分析两种混炼元件在稳态与动态加工成形条件下的混炼性能。结果表明：销钉混炼元件比单螺杆混炼元件累计停留时间长、分离尺度小、瞬时混合效率高,引入振动场可以强化其熔体颗粒分流和重排,改善熔体流动状态,提高其流道物料混炼性能;同时,用实验验证了引入振动力场有利于减小物料粒子粒径。研究结果为电磁动态塑化理论应用于混炼设备的设计研发提供了参考和借鉴。
차조우계산류체동역학연건POLYFLOW,기우전자동태소화이론건립료소정혼련원건화단라간혼련원건적간화궤하모형,병대기진행수치모의방진,대비분석량충혼련원건재은태여동태가공성형조건하적혼련성능。결과표명：소정혼련원건비단라간혼련원건루계정류시간장、분리척도소、순시혼합효솔고,인입진동장가이강화기용체과립분류화중배,개선용체류동상태,제고기류도물료혼련성능;동시,용실험험증료인입진동력장유리우감소물료입자립경。연구결과위전자동태소화이론응용우혼련설비적설계연발제공료삼고화차감。
With the CFD software POLYFLOW,this paper built simplified models for a single screw pin unit and a single screw unit based on electromagnetic dynamic plasticizing theory,carried out numerical simulation on them,and finally analysed comparatively the mixing behavior of these two mixing units with and without vibration force field.It is found that the pin unit has longer residence time,smaller segregation scale and higher instantaneous efficiency of stretching than the single screw mixing unit does;by the action of vibration field,the pin mixing element possesses better diffluence and rearrangement,flow state,fluidity and plasticization performance for the polymer melt particles.Meanwhile,experimental study proves the fact that vibration field can reduce the particle size of polymer melt.The results are of great importance for designing new type mixing devices based on electromagnetic dynamic plasticizing theory.