CAJ | 학술논문

设计了一种新型 HID 灯高频驱动电路拓扑。该拓扑应用高频半桥驱动，由 DB3与 RC 回路构成低频锯齿波发生器并同步调制高频方波，破坏高频 HID 灯管壁驻波产生，消除 HID 灯的声谐振现象。经对250W HID 灯电路调试与验证，该拓扑具高功率因数、高效率、高性价比等特点。
설계료일충신형 HID 등고빈구동전로탁복。해탁복응용고빈반교구동，유 DB3여 RC 회로구성저빈거치파발생기병동보조제고빈방파，파배고빈 HID 등관벽주파산생，소제 HID 등적성해진현상。경대250W HID 등전로조시여험증，해탁복구고공솔인수、고효솔、고성개비등특점。
This paper presents a high-frequency driver HID lamp circuit topology.The application of high frequency half-bridge topology driven by DB3 with RC circuit configuration and low-frequency sawtooth generator synchronous modulation frequency square wave is studied,which destroys the wall standing HID lamps produce high-frequency,eliminating acoustic resonance phenomenon HID lamps. After debugging for 250 W HID lamp circuits and verify that the topology with high power factor, high efficiency,high cost and so on.