CAJ | 학술논문

　　为研究粒状不饱和聚酯模塑料的摩擦磨损特性及试验方法，以几种不饱和聚酯模塑料为研究对象，比较了不同对磨材料、摩擦时间对粒状不饱和聚酯模塑料磨损量和摩擦系数的影响。结果表明：对磨材料对粒状不饱和聚酯模塑料的耐磨性影响比较大，选用普通UP环作为对磨材料比用45钢更适合于不饱和聚酯模塑料的耐磨性测试；采用普通UP环作对磨材料时，不饱和聚酯模塑料的磨损量随对磨时间延长而不断增大，但摩擦系数变化并不严格遵循材料滑动磨损过程的一般规律。
　　위연구립상불포화취지모소료적마찰마손특성급시험방법，이궤충불포화취지모소료위연구대상，비교료불동대마재료、마찰시간대립상불포화취지모소료마손량화마찰계수적영향。결과표명：대마재료대립상불포화취지모소료적내마성영향비교대，선용보통UP배작위대마재료비용45강경괄합우불포화취지모소료적내마성측시；채용보통UP배작대마재료시，불포화취지모소료적마손량수대마시간연장이불단증대，단마찰계수변화병불엄격준순재료활동마손과정적일반규률。
To study the friction and wear characteristics and test method of a granular unsaturated polyes-ter moulding compound, using several kinds of unsaturated polyester moulding compound as research ob-ject, the effects of different friction pair materials and friction time on the wear loss and friction coeffi-cient of the UP moulding compound were compared. The results show that the effect of friction pair ma-terials on the wear resistance of the moulding compound is bigger, and the UP ring is more suitable than 45 steel ring for the wear resistance test of the UP moulding compound as the friction pair materi-al. Using common UP ring as friction pair material, the wear loss of the UP moulding compound increas-es with the time prolonged, but the change of friction coefficient does not strictly follow the general rule in sliding wear process.