金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2012年
3期
51-54
,共4页
张勤俭%李建勇%蔡永林%王恒%王先逵
張勤儉%李建勇%蔡永林%王恆%王先逵
장근검%리건용%채영림%왕항%왕선규
微细超声加工%金刚石拉丝模%金属微丝
微細超聲加工%金剛石拉絲模%金屬微絲
미세초성가공%금강석랍사모%금속미사
金属微丝在是指直径在0.10 mm以下的各种金属丝.金属微丝不但具有金属材料本身固有的一切优点,还具有非金属材料的一些特殊性能,例如高强度,高弹性,良好的导电性、导热性、耐磨防腐性、耐高温、热稳定性,较好的屏蔽、防磁、防辐射性能,不易产生静电效应等,被广泛应用于国民经济各个领域.现代科技的发展需求促使金属微丝向精、微的方向拓展,对金刚石微丝拉拔模具的精度提出了更高的要求,而我国对于该类模具的加工精度与日本、德国相差较远.作者在前期研究的基础上对金属微丝拉拔模具关键技术——微细超声加工技术进行了深入的研究,加工的模具尺寸误差为0.42μm,圆度误差为0.18Lm,完全达到了日本和德国的标准,达到国际领先水平.
金屬微絲在是指直徑在0.10 mm以下的各種金屬絲.金屬微絲不但具有金屬材料本身固有的一切優點,還具有非金屬材料的一些特殊性能,例如高彊度,高彈性,良好的導電性、導熱性、耐磨防腐性、耐高溫、熱穩定性,較好的屏蔽、防磁、防輻射性能,不易產生靜電效應等,被廣汎應用于國民經濟各箇領域.現代科技的髮展需求促使金屬微絲嚮精、微的方嚮拓展,對金剛石微絲拉拔模具的精度提齣瞭更高的要求,而我國對于該類模具的加工精度與日本、德國相差較遠.作者在前期研究的基礎上對金屬微絲拉拔模具關鍵技術——微細超聲加工技術進行瞭深入的研究,加工的模具呎吋誤差為0.42μm,圓度誤差為0.18Lm,完全達到瞭日本和德國的標準,達到國際領先水平.
금속미사재시지직경재0.10 mm이하적각충금속사.금속미사불단구유금속재료본신고유적일절우점,환구유비금속재료적일사특수성능,례여고강도,고탄성,량호적도전성、도열성、내마방부성、내고온、열은정성,교호적병폐、방자、방복사성능,불역산생정전효응등,피엄범응용우국민경제각개영역.현대과기적발전수구촉사금속미사향정、미적방향탁전,대금강석미사랍발모구적정도제출료경고적요구,이아국대우해류모구적가공정도여일본、덕국상차교원.작자재전기연구적기출상대금속미사랍발모구관건기술——미세초성가공기술진행료심입적연구,가공적모구척촌오차위0.42μm,원도오차위0.18Lm,완전체도료일본화덕국적표준,체도국제령선수평.