现代铸铁
現代鑄鐵
현대주철
MODERN CAST IRON
2013年
2期
23-28
,共6页
严杰%徐贵宝%朱正峰%丁慧海%张余兴
嚴傑%徐貴寶%硃正峰%丁慧海%張餘興
엄걸%서귀보%주정봉%정혜해%장여흥
球墨铸铁%数值模拟%磁痕%发热冒口
毬墨鑄鐵%數值模擬%磁痕%髮熱冒口
구묵주철%수치모의%자흔%발열모구
原工艺产生的铸件表面有磁痕聚集缺陷,利用数值模拟软件分析后,认为原因是充型过程中的紊流和飞溅导致大量氧化夹杂,以及充型后期铁液中氧化渣上浮、聚集所致.最后采取底注方式,浇注位置避开铸型和砂芯,充型前方预留足够的充型空间,内浇道前方设置陶瓷过滤网,铸件热节部位采用球铁专用发热冒口等措施,有效地解决二次氧化夹渣导致的磁痕缺陷,并防止了缩松缺陷的产生,工艺出品率得以提高.
原工藝產生的鑄件錶麵有磁痕聚集缺陷,利用數值模擬軟件分析後,認為原因是充型過程中的紊流和飛濺導緻大量氧化夾雜,以及充型後期鐵液中氧化渣上浮、聚集所緻.最後採取底註方式,澆註位置避開鑄型和砂芯,充型前方預留足夠的充型空間,內澆道前方設置陶瓷過濾網,鑄件熱節部位採用毬鐵專用髮熱冒口等措施,有效地解決二次氧化夾渣導緻的磁痕缺陷,併防止瞭縮鬆缺陷的產生,工藝齣品率得以提高.
원공예산생적주건표면유자흔취집결함,이용수치모의연건분석후,인위원인시충형과정중적문류화비천도치대량양화협잡,이급충형후기철액중양화사상부、취집소치.최후채취저주방식,요주위치피개주형화사심,충형전방예류족구적충형공간,내요도전방설치도자과려망,주건열절부위채용구철전용발열모구등조시,유효지해결이차양화협사도치적자흔결함,병방지료축송결함적산생,공예출품솔득이제고.