电机与控制应用
電機與控製應用
전궤여공제응용
ELECTRIC MACHINES & CONTROL APPLICATION
2014年
1期
48-50
,共3页
转子端板%断齿%疲劳断裂%故障
轉子耑闆%斷齒%疲勞斷裂%故障
전자단판%단치%피로단렬%고장
rotor end plate%broken teeth%fatigue fracture%failure
交流变频电机转子的端板在运行过程中多次出现断齿现象,严重影响了设备的正常运行,从断齿的结构强度、金相分析及材料硬度三个方面对断齿原因进行分析,发现断齿的主要原因是由于端板在激光切割成形时,对结构造成破坏,形成初始裂纹,在运行过程中对齿部产生附加载荷,引起端板齿部疲劳断裂,通过对结构尺寸进行改进,彻底解决了端板断齿问题.
交流變頻電機轉子的耑闆在運行過程中多次齣現斷齒現象,嚴重影響瞭設備的正常運行,從斷齒的結構彊度、金相分析及材料硬度三箇方麵對斷齒原因進行分析,髮現斷齒的主要原因是由于耑闆在激光切割成形時,對結構造成破壞,形成初始裂紋,在運行過程中對齒部產生附加載荷,引起耑闆齒部疲勞斷裂,通過對結構呎吋進行改進,徹底解決瞭耑闆斷齒問題.
교류변빈전궤전자적단판재운행과정중다차출현단치현상,엄중영향료설비적정상운행,종단치적결구강도、금상분석급재료경도삼개방면대단치원인진행분석,발현단치적주요원인시유우단판재격광절할성형시,대결구조성파배,형성초시렬문,재운행과정중대치부산생부가재하,인기단판치부피로단렬,통과대결구척촌진행개진,철저해결료단판단치문제.