宝钢技术
寶鋼技術
보강기술
BAOSTEEL TECHNOLOGY
2013年
6期
6-11
,共6页
焦炭%反应性%高炉%未燃煤粉
焦炭%反應性%高爐%未燃煤粉
초탄%반응성%고로%미연매분
简要介绍了现行焦炭反应性试验方法的来源,主要表达焦炭在高炉内进入风口回旋区前抗CO2气化能力以及反应后的抗粉化能力,是一种规范性试验方法.回顾了国内外对焦炭反应性的认识和变化,20世纪认为反应性表达焦炭在高炉抗CO2的气化能力,反应性高反应后强度低对高炉生产不利.进入21世纪,新日铁提出反应性只是表达了焦炭的活性,认为提高反应性可以提高高炉反应效率,对高炉生产有利,不同时期认识水平不同认知也会完全相反.通过CO2含量和反应温度对焦炭反应性影响试验和高炉碳平衡计算,分析了喷吹煤粉高炉内焦炭的行为,确定了焦炭进入风口回旋区前的反应失重率.提出现行国家标准“焦炭反应性及反应后强度试验方法”的反应性表达的是焦炭与CO2反应的活性,高炉内焦炭反应失重率控制因素是矿石的还原性能和未燃煤粉率,与焦炭实验室测定的反应性无关.
簡要介紹瞭現行焦炭反應性試驗方法的來源,主要錶達焦炭在高爐內進入風口迴鏇區前抗CO2氣化能力以及反應後的抗粉化能力,是一種規範性試驗方法.迴顧瞭國內外對焦炭反應性的認識和變化,20世紀認為反應性錶達焦炭在高爐抗CO2的氣化能力,反應性高反應後彊度低對高爐生產不利.進入21世紀,新日鐵提齣反應性隻是錶達瞭焦炭的活性,認為提高反應性可以提高高爐反應效率,對高爐生產有利,不同時期認識水平不同認知也會完全相反.通過CO2含量和反應溫度對焦炭反應性影響試驗和高爐碳平衡計算,分析瞭噴吹煤粉高爐內焦炭的行為,確定瞭焦炭進入風口迴鏇區前的反應失重率.提齣現行國傢標準“焦炭反應性及反應後彊度試驗方法”的反應性錶達的是焦炭與CO2反應的活性,高爐內焦炭反應失重率控製因素是礦石的還原性能和未燃煤粉率,與焦炭實驗室測定的反應性無關.
간요개소료현행초탄반응성시험방법적래원,주요표체초탄재고로내진입풍구회선구전항CO2기화능력이급반응후적항분화능력,시일충규범성시험방법.회고료국내외대초탄반응성적인식화변화,20세기인위반응성표체초탄재고로항CO2적기화능력,반응성고반응후강도저대고로생산불리.진입21세기,신일철제출반응성지시표체료초탄적활성,인위제고반응성가이제고고로반응효솔,대고로생산유리,불동시기인식수평불동인지야회완전상반.통과CO2함량화반응온도대초탄반응성영향시험화고로탄평형계산,분석료분취매분고로내초탄적행위,학정료초탄진입풍구회선구전적반응실중솔.제출현행국가표준“초탄반응성급반응후강도시험방법”적반응성표체적시초탄여CO2반응적활성,고로내초탄반응실중솔공제인소시광석적환원성능화미연매분솔,여초탄실험실측정적반응성무관.