化工新型材料
化工新型材料
화공신형재료
NEW CHEMICAL MATERIALS
2013年
12期
137-139,143
,共4页
朱艳虹%沈琴%穆颖%常春%杨建红
硃豔虹%瀋琴%穆穎%常春%楊建紅
주염홍%침금%목영%상춘%양건홍
马来酸类反应性乳化剂%无皂乳液%丙烯酸酯
馬來痠類反應性乳化劑%無皂乳液%丙烯痠酯
마래산류반응성유화제%무조유액%병희산지
以甲基丙烯酸甲酯、丙烯酸丁酯为主单体,使用自制的马来酸类反应性乳化剂,通过预乳化、半连续聚合工艺合成了丙烯酸酯无皂乳液,采用FT-IR、SEM、纳米激光粒度仪、接触角分析仪、涂膜铅笔划痕硬度仪、漆膜附着力测定仪对乳液及其涂膜的结构和性能进行了测试,研究了反应性乳化剂用量对单体转化率、乳液稳定性、粘度、乳胶粒粒径及其分布和乳胶膜耐水性、硬度及附着力的影响,并与以十二烷基硫酸钠(SDS)为乳化剂制备的丙烯酸酯乳液进行了对比.结果表明,无皂乳液的乳胶粒粒径大于常规乳液,且粒子大小更均一,形态更规整;无皂乳液的化学稳定性、胶膜的耐水性、硬度及附着力也明显优于常规乳液.当反应性乳化剂用量占单体总质量的4.5%时,乳液及涂膜的综合性能最佳.
以甲基丙烯痠甲酯、丙烯痠丁酯為主單體,使用自製的馬來痠類反應性乳化劑,通過預乳化、半連續聚閤工藝閤成瞭丙烯痠酯無皂乳液,採用FT-IR、SEM、納米激光粒度儀、接觸角分析儀、塗膜鉛筆劃痕硬度儀、漆膜附著力測定儀對乳液及其塗膜的結構和性能進行瞭測試,研究瞭反應性乳化劑用量對單體轉化率、乳液穩定性、粘度、乳膠粒粒徑及其分佈和乳膠膜耐水性、硬度及附著力的影響,併與以十二烷基硫痠鈉(SDS)為乳化劑製備的丙烯痠酯乳液進行瞭對比.結果錶明,無皂乳液的乳膠粒粒徑大于常規乳液,且粒子大小更均一,形態更規整;無皂乳液的化學穩定性、膠膜的耐水性、硬度及附著力也明顯優于常規乳液.噹反應性乳化劑用量佔單體總質量的4.5%時,乳液及塗膜的綜閤性能最佳.
이갑기병희산갑지、병희산정지위주단체,사용자제적마래산류반응성유화제,통과예유화、반련속취합공예합성료병희산지무조유액,채용FT-IR、SEM、납미격광립도의、접촉각분석의、도막연필화흔경도의、칠막부착력측정의대유액급기도막적결구화성능진행료측시,연구료반응성유화제용량대단체전화솔、유액은정성、점도、유효립립경급기분포화유효막내수성、경도급부착력적영향,병여이십이완기류산납(SDS)위유화제제비적병희산지유액진행료대비.결과표명,무조유액적유효립립경대우상규유액,차입자대소경균일,형태경규정;무조유액적화학은정성、효막적내수성、경도급부착력야명현우우상규유액.당반응성유화제용량점단체총질량적4.5%시,유액급도막적종합성능최가.