安徽电气工程职业技术学院学报
安徽電氣工程職業技術學院學報
안휘전기공정직업기술학원학보
JOURNAL OF ANHUI ELECTRICAL ENGINEERING PROFESSIONAL TECHNIQUE COLLEGE
2014年
1期
90-95
,共6页
正交试验%燃烧调整%W型锅炉
正交試驗%燃燒調整%W型鍋爐
정교시험%연소조정%W형과로
orthogonal test%combustion adjustment%W-flame boiler
采用正交试验法设计燃烧调整试验,寻找W型燃烧锅炉高效低污染燃烧方式。试验发现:正交法设计的试验结果可对比性强,能有效降低试验次数,节约资源;预备性试验对于正交试验方案设计至关重要;氧量对炉效、NOx 生成量及主汽压均有显著影响;燃尽风对抑制NOx生成效果明显,但燃尽风过量时会降低炉效并影响主汽压稳定;二次风箱压力对NOx 生成量有轻微影响,对主汽压有一定影响;配风方式对各项指标影响不明显;通过试验否定了早期“二次风门实际开度左大右小,需对风门进行检修”的判断,节约了人力物力;发现低氮燃烧器改造时所设计的燃尽风喷口过大,风门可利用行程区间短等问题。
採用正交試驗法設計燃燒調整試驗,尋找W型燃燒鍋爐高效低汙染燃燒方式。試驗髮現:正交法設計的試驗結果可對比性彊,能有效降低試驗次數,節約資源;預備性試驗對于正交試驗方案設計至關重要;氧量對爐效、NOx 生成量及主汽壓均有顯著影響;燃儘風對抑製NOx生成效果明顯,但燃儘風過量時會降低爐效併影響主汽壓穩定;二次風箱壓力對NOx 生成量有輕微影響,對主汽壓有一定影響;配風方式對各項指標影響不明顯;通過試驗否定瞭早期“二次風門實際開度左大右小,需對風門進行檢脩”的判斷,節約瞭人力物力;髮現低氮燃燒器改造時所設計的燃儘風噴口過大,風門可利用行程區間短等問題。
채용정교시험법설계연소조정시험,심조W형연소과로고효저오염연소방식。시험발현:정교법설계적시험결과가대비성강,능유효강저시험차수,절약자원;예비성시험대우정교시험방안설계지관중요;양량대로효、NOx 생성량급주기압균유현저영향;연진풍대억제NOx생성효과명현,단연진풍과량시회강저로효병영향주기압은정;이차풍상압력대NOx 생성량유경미영향,대주기압유일정영향;배풍방식대각항지표영향불명현;통과시험부정료조기“이차풍문실제개도좌대우소,수대풍문진행검수”적판단,절약료인력물력;발현저담연소기개조시소설계적연진풍분구과대,풍문가이용행정구간단등문제。
By orthogonal test design combustion adjustment trial to find the W-type combustion boiler combustion efficiency and low pollution. Research shows: Comparing the results of orthogonal test, can effectively reduce the test times, saving resources;Preliminary test is essential for the design of orthogo-nal test;Oxygen effect on NOx production and furnace efficiency has the main steam pressure;OFA sig-nificantly inhibited the production of NOx effect, but too much will reduce the boiler efficiency and main steam pressure stabilizing effect;The hot air pressure has a slight effect on NOx production, has a certain effect on the main steam pressure;Influence of air distribution method of index is not obvious;Test nega-tives about the throttle opening uneven judgment. Through the test can save manpower and material re-sources. The researchers found some problems such as OFA nozzle is too large, the interval is too short.