江苏科技大学学报(自然科学版)
江囌科技大學學報(自然科學版)
강소과기대학학보(자연과학판)
JOURNAL OF JIANGSU UNIVERSITY OF SCIENCE AND TECHNOLOGY(NATURAL SCIENCE EDITION)
2013年
6期
532-535
,共4页
邹家生%潘浩%刘川%许祥平
鄒傢生%潘浩%劉川%許祥平
추가생%반호%류천%허상평
核电厚壁结构%X射线衍射法%残余应力
覈電厚壁結構%X射線衍射法%殘餘應力
핵전후벽결구%X사선연사법%잔여응력
thick-walled structure%X-ray diffraction method%residual stress
采用X射线衍射法( XRD)对大型核电厚壁结构堆芯板端面、堆芯板与吊篮筒体环焊缝焊前焊后残余应力进行无损测量。研究堆芯板端面、环焊缝焊前焊后残余应力的分布情况及变化规律。结果表明:堆芯板焊前残余应力主要是机加工应力,且焊接过程对其残余应力影响不大;1#和2#堆芯板环焊缝轴向残余应力分布趋势明显,呈现焊缝为压应力,母材为拉应力;测试的环向应力在各区域分布不一致;焊接对远离焊缝区域的应力没有影响,远离焊缝区域呈现较大的加工应力。
採用X射線衍射法( XRD)對大型覈電厚壁結構堆芯闆耑麵、堆芯闆與弔籃筒體環銲縫銲前銲後殘餘應力進行無損測量。研究堆芯闆耑麵、環銲縫銲前銲後殘餘應力的分佈情況及變化規律。結果錶明:堆芯闆銲前殘餘應力主要是機加工應力,且銲接過程對其殘餘應力影響不大;1#和2#堆芯闆環銲縫軸嚮殘餘應力分佈趨勢明顯,呈現銲縫為壓應力,母材為拉應力;測試的環嚮應力在各區域分佈不一緻;銲接對遠離銲縫區域的應力沒有影響,遠離銲縫區域呈現較大的加工應力。
채용X사선연사법( XRD)대대형핵전후벽결구퇴심판단면、퇴심판여조람통체배한봉한전한후잔여응력진행무손측량。연구퇴심판단면、배한봉한전한후잔여응력적분포정황급변화규률。결과표명:퇴심판한전잔여응력주요시궤가공응력,차한접과정대기잔여응력영향불대;1#화2#퇴심판배한봉축향잔여응력분포추세명현,정현한봉위압응력,모재위랍응력;측시적배향응력재각구역분포불일치;한접대원리한봉구역적응력몰유영향,원리한봉구역정현교대적가공응력。
The residual stresses of large nuclear thick-walled structures, including the core plate before and after welding and the welded structure with the core plate and the core barrel shell , were measured with the X -ray diffraction method ( XRD) .The distribution and variation of measured residual stresses have been studied .The results show that the residual stress in core plate end face before welding is mainly the machining stress and the welding process has little effect on the residual stresses in core plate end face ;the trend of axial stresses in two circular welds is similar to compressive stress in the weld and tensile stress in the base metal ; measured hoop stress distributions across the two girth joints vary significantly at different locations; the stresses away from the weld zone are mainly machining stresses .