润滑与密封
潤滑與密封
윤활여밀봉
LUBRICATION ENGINEERING
2014年
3期
75-78
,共4页
张艳娟%王建梅%蔡敏%吉宏斌
張豔娟%王建梅%蔡敏%吉宏斌
장염연%왕건매%채민%길굉빈
油膜轴承%润滑油%黏温特性%润滑性能
油膜軸承%潤滑油%黏溫特性%潤滑性能
유막축승%윤활유%점온특성%윤활성능
oil film bearing%lubricating oil%viscosity-temperature characteristic%lubricating performances
为了研究油膜轴承油的黏温特性,采用NDJ-5 S数显旋转黏度计测定S220、M220和H460三种油膜轴承油在常压、20~90℃温度范围的黏度值,得到不同黏度等级油膜轴承油的黏温曲线,并采用幂关系式和指数关系式对黏-温曲线进行拟合,得到三种油膜轴承油的黏温公式。分析比较拟合结果表明,在20~90℃温度范围内以幂关系作为油膜轴承油的黏温公式更符合实际情况。
為瞭研究油膜軸承油的黏溫特性,採用NDJ-5 S數顯鏇轉黏度計測定S220、M220和H460三種油膜軸承油在常壓、20~90℃溫度範圍的黏度值,得到不同黏度等級油膜軸承油的黏溫麯線,併採用冪關繫式和指數關繫式對黏-溫麯線進行擬閤,得到三種油膜軸承油的黏溫公式。分析比較擬閤結果錶明,在20~90℃溫度範圍內以冪關繫作為油膜軸承油的黏溫公式更符閤實際情況。
위료연구유막축승유적점온특성,채용NDJ-5 S수현선전점도계측정S220、M220화H460삼충유막축승유재상압、20~90℃온도범위적점도치,득도불동점도등급유막축승유적점온곡선,병채용멱관계식화지수관계식대점-온곡선진행의합,득도삼충유막축승유적점온공식。분석비교의합결과표명,재20~90℃온도범위내이멱관계작위유막축승유적점온공식경부합실제정황。
In order to study the viscosity-temperature characteristic of lubricating oils used in oil film bearing,the NDJ-5 S digital viscometer was used to measure the viscosity of S220 oil,M220 oil,and H460 oil under normal pressure and the temperature ranging from 20 ℃ to 100 ℃.The viscosity-temperature curves of the three oils were got,and the viscosity-temperature formulae were obtained by fitting the viscosity-temperature curves with power relationship and exponential rela-tionship.It is shown through analyzing the fitting results that the power relationship as the viscosity temperature formula of the lubricating of oil film bearing is more consistent with the actual situation.