电网技术
電網技術
전망기술
POWER SYSTEM TECHNOLOGY
2014年
4期
947-951
,共5页
建模%等效电路%光伏%分段线性
建模%等效電路%光伏%分段線性
건모%등효전로%광복%분단선성
modeling%equivalent circuit%photovoltaic (PV)%piecewise linearization
根据光伏阵列在系统分析以及仿真实验等具体应用中的要求,为了对其非线性 I-U 特性进行简化等效,提出了一种基于分段线性的等效方法。该方法利用相对简单的线性模型以及相应的等效电路来描述光伏阵列的 I-U 特性。通过分段线性化,使光伏非线性关系由多段线性方程来代替。而对于每一段线性方程,用一个等效电路表示。最终提出了一个含多个并联支路的光伏电源 I-U 特性等效电路。利用PSCAD软件搭建了分段线性等效电路的仿真模型,并将仿真结果与数学解析计算结果进行了比较。分析结果表明,分段线性模型能很好地表示光伏阵列的非线性I-U特性。
根據光伏陣列在繫統分析以及倣真實驗等具體應用中的要求,為瞭對其非線性 I-U 特性進行簡化等效,提齣瞭一種基于分段線性的等效方法。該方法利用相對簡單的線性模型以及相應的等效電路來描述光伏陣列的 I-U 特性。通過分段線性化,使光伏非線性關繫由多段線性方程來代替。而對于每一段線性方程,用一箇等效電路錶示。最終提齣瞭一箇含多箇併聯支路的光伏電源 I-U 特性等效電路。利用PSCAD軟件搭建瞭分段線性等效電路的倣真模型,併將倣真結果與數學解析計算結果進行瞭比較。分析結果錶明,分段線性模型能很好地錶示光伏陣列的非線性I-U特性。
근거광복진렬재계통분석이급방진실험등구체응용중적요구,위료대기비선성 I-U 특성진행간화등효,제출료일충기우분단선성적등효방법。해방법이용상대간단적선성모형이급상응적등효전로래묘술광복진렬적 I-U 특성。통과분단선성화,사광복비선성관계유다단선성방정래대체。이대우매일단선성방정,용일개등효전로표시。최종제출료일개함다개병련지로적광복전원 I-U 특성등효전로。이용PSCAD연건탑건료분단선성등효전로적방진모형,병장방진결과여수학해석계산결과진행료비교。분석결과표명,분단선성모형능흔호지표시광복진렬적비선성I-U특성。
According to the requirements of applying photovoltaic (PV) array in system analysis and simulation experiments, to perform simplified equivalence of PV array’s non-linear characteristics of current to voltage, a piecewise linearization based equivalence method is put forward. The proposed method describes the I-U characteristics of PV array by relatively simple linear models and corresponding equivalent circuits. Through piecewise linearization, the non-linear relation of PV array is represented by multi-sectional linear equations, and each linear equation describing corresponding section of the characteristic curve is represented by an equivalent circuit. Finally, an equivalent circuit representing the I-U characteristics of PV array, which contains multi parallel branches, is proposed. Using PSCAD software, a simulation model containing piecewisely linearized equivalent circuits is constructed. Simulation results are compared with the results from mathematical analytical calculation and comparison result shows that the multi-sectional piecewisely linearized model can represent the non-linear I-U characteristics of PV array pretty well.