煤
煤
매
COAL
2013年
5期
20-21,27
,共3页
油页岩%干馏%含油率
油頁巖%榦餾%含油率
유혈암%간류%함유솔
以内蒙古苏尼特左旗油页岩为研究对象,采用低温铝甄干馏的方法,对影响其出油率的主要因素进行研究分析,考察了加热速率、干馏终温、持温时间及页岩粒度大小对油页岩出油率的影响.结果表明:加热速率为7℃/min,终温510℃,持温时间25 min且粒径大小约为3mm的条件下,页岩出油率最高,此时的页岩油出油率为4.42%.
以內矇古囌尼特左旂油頁巖為研究對象,採用低溫鋁甄榦餾的方法,對影響其齣油率的主要因素進行研究分析,攷察瞭加熱速率、榦餾終溫、持溫時間及頁巖粒度大小對油頁巖齣油率的影響.結果錶明:加熱速率為7℃/min,終溫510℃,持溫時間25 min且粒徑大小約為3mm的條件下,頁巖齣油率最高,此時的頁巖油齣油率為4.42%.
이내몽고소니특좌기유혈암위연구대상,채용저온려견간류적방법,대영향기출유솔적주요인소진행연구분석,고찰료가열속솔、간류종온、지온시간급혈암립도대소대유혈암출유솔적영향.결과표명:가열속솔위7℃/min,종온510℃,지온시간25 min차립경대소약위3mm적조건하,혈암출유솔최고,차시적혈암유출유솔위4.42%.