CAJ | 학술논문

将质量分数为5％的绢云母颗粒添加到无机硅酸锌涂料固相成分中，采用三层刷涂制备涂层，通过干磨损实验和声发射擦伤实验，考察添加绢云母对无机硅酸锌涂料磨损性能的影响．结果表明，绢云母的添加降低了涂层的摩擦系数，减轻了涂层的塑性变形，阻止了涂层内部裂纹的产生和扩展，使涂层声发射信号的强度相对降低，增强了涂层的耐磨性能，一定程度上扩大了涂层的应用空间．
장질량분수위5％적견운모과립첨가도무궤규산자도료고상성분중，채용삼층쇄도제비도층，통과간마손실험화성발사찰상실험，고찰첨가견운모대무궤규산자도료마손성능적영향．결과표명，견운모적첨가강저료도층적마찰계수，감경료도층적소성변형，조지료도층내부렬문적산생화확전，사도층성발사신호적강도상대강저，증강료도층적내마성능，일정정도상확대료도층적응용공간．
Five percent mass fraction of serlcite is added in the solid phase composition of inorganic zinc-silicate coatings. The coatings are prepared by the three-brushing. The performance is tested by dry wear experiments and acoustic emission abrasion experi- ments. The result shows that wear resistance enhanced by reducing the friction coefficient and plastic deformation of coatings, the generation and expansion of internal cracks in the coating is prevented, the strength of acoustic emission signal is reduced, wear resistance of coatings are enhanced by adding sericite. The application space of coating is expanded by adding sericite.