北京印刷学院学报
北京印刷學院學報
북경인쇄학원학보
JOURNAL OF BEIJING INSTITUTE OF GRAPHIC COMMUNICATION
2012年
6期
24-27,31
,共5页
罗开元%黄蓓青%魏先福%余木群%顾灵雅
囉開元%黃蓓青%魏先福%餘木群%顧靈雅
라개원%황배청%위선복%여목군%고령아
流变动力学%UV体系%固化速度%表征方法
流變動力學%UV體繫%固化速度%錶徵方法
류변동역학%UV체계%고화속도%표정방법
rheokinetics%UV curing system%curing rate%characterization method
为了更好地表征UV体系固化速度,研究引发剂的种类与含量对聚酯丙烯酸酯固化过程中的影响,实验采用装有UV固化组件的流变仪,实时监测含有不同种类和浓度光引发剂的UV光油体系固化过程中的动态流变参数(弹性模量G')的变化,再通过曲线拟合、求导,来表征该UV体系固化速度。研究结果表明,含光引发剂DETX的UV固化体系在固化过程中,弹性模量G'值达到平衡的时间短且平衡值较高,固化速度快、固化程度高;引发剂含量影响UV体系固化反应速率,引发剂含量过高反而会导致UV体系固化速率下降。
為瞭更好地錶徵UV體繫固化速度,研究引髮劑的種類與含量對聚酯丙烯痠酯固化過程中的影響,實驗採用裝有UV固化組件的流變儀,實時鑑測含有不同種類和濃度光引髮劑的UV光油體繫固化過程中的動態流變參數(彈性模量G')的變化,再通過麯線擬閤、求導,來錶徵該UV體繫固化速度。研究結果錶明,含光引髮劑DETX的UV固化體繫在固化過程中,彈性模量G'值達到平衡的時間短且平衡值較高,固化速度快、固化程度高;引髮劑含量影響UV體繫固化反應速率,引髮劑含量過高反而會導緻UV體繫固化速率下降。
위료경호지표정UV체계고화속도,연구인발제적충류여함량대취지병희산지고화과정중적영향,실험채용장유UV고화조건적류변의,실시감측함유불동충류화농도광인발제적UV광유체계고화과정중적동태류변삼수(탄성모량G')적변화,재통과곡선의합、구도,래표정해UV체계고화속도。연구결과표명,함광인발제DETX적UV고화체계재고화과정중,탄성모량G'치체도평형적시간단차평형치교고,고화속도쾌、고화정도고;인발제함량영향UV체계고화반응속솔,인발제함량과고반이회도치UV체계고화속솔하강。
A method based on rheokinetics was used to characterize radical polymerization reaction which initiated by UV light.Changes of G'(dynamic modulus) in every stage of curing process were real-time monitored by a rheometer equipped with UV curing accessory.The influence of varieties and contents of photo-initiators on curing process of polyester acrylates was studied.Associating conversion rate with dynamic modulus,a nonlinear kinetic equation was set up to describe the cure reaction.The results show that during the curing processes,G' of sample contains photo-initiator DETX is easier to reach,and its balanced value G' is higher.The curing rate is faster;the curing degree is higher,the content of photo-initiator has some effects on the curing rate of UV curing system.The curing rate of UV curing system is decrease instead when the contents of photo-initiator is over higher.