中国机械工程
中國機械工程
중국궤계공정
CHINA MECHANICAl ENGINEERING
2012年
15期
1830-1832,1839
,共4页
徐梓雯%那景新%张志远%王童
徐梓雯%那景新%張誌遠%王童
서재문%나경신%장지원%왕동
螺栓连接%有限元分析%弹性接触%GAP单元
螺栓連接%有限元分析%彈性接觸%GAP單元
라전련접%유한원분석%탄성접촉%GAP단원
bolted connection%finite element analysis%elastic contact%GAP element
采用刚性梁单元模拟螺栓连接结构来进行有限元分析不能准确计算螺栓连接区域的应力。根据真实螺栓连接结构的特点和连接原理,提出了基于弹性接触的螺栓连接模型,该模型引入GAP单元定义了被连接件之间的弹性接触与摩擦条件,并用实验验证了该方法的有效性。
採用剛性樑單元模擬螺栓連接結構來進行有限元分析不能準確計算螺栓連接區域的應力。根據真實螺栓連接結構的特點和連接原理,提齣瞭基于彈性接觸的螺栓連接模型,該模型引入GAP單元定義瞭被連接件之間的彈性接觸與摩抆條件,併用實驗驗證瞭該方法的有效性。
채용강성량단원모의라전련접결구래진행유한원분석불능준학계산라전련접구역적응력。근거진실라전련접결구적특점화련접원리,제출료기우탄성접촉적라전련접모형,해모형인입GAP단원정의료피련접건지간적탄성접촉여마찰조건,병용실험험증료해방법적유효성。
Utilizing rigid--beam element to simulate the structure of culate the local stress of bolted connection. Therefore, an elastic contact ement was introduce to define the elastic contact and friction condition of posed according to the structure and characteristic of bolted connection. to verify the validity of the proposed method. bolted connection cannot cal- based bolted model (GAP el- bolted components) was pro Finally, a test was designed