塑料
塑料
소료
PLASTICS
2013年
2期
19-22
,共4页
陈斌艺%黄岸%王元盛%姜姗姗%彭响方
陳斌藝%黃岸%王元盛%薑姍姍%彭響方
진빈예%황안%왕원성%강산산%팽향방
聚乳酸%有机蒙脱土%纳米复合材料%熔融插层%微孔发泡
聚乳痠%有機矇脫土%納米複閤材料%鎔融插層%微孔髮泡
취유산%유궤몽탈토%납미복합재료%용융삽층%미공발포
通过双螺杆挤出机熔融混合制备聚乳酸/蒙脱土纳米复合材料,研究了纳米复合材料力学性能、流变性能和结晶性能.XRD和TEM测试结果表明:蒙脱土以插层结构分散在复合材料中.对于不同的蒙脱土含量,材料性能测试表明:2%蒙脱土所对应的纳米复合材料的力学性能和流变性能最好.文中选取了蒙脱土质量分数为2%的复合材料以超临界二氧化碳为发泡剂进行微孔发泡,泡孔形态分析表明:蒙脱土在发泡过程中起成核剂的作用,增加了PLA发泡材料的泡孔密度,减小泡孔尺寸.
通過雙螺桿擠齣機鎔融混閤製備聚乳痠/矇脫土納米複閤材料,研究瞭納米複閤材料力學性能、流變性能和結晶性能.XRD和TEM測試結果錶明:矇脫土以插層結構分散在複閤材料中.對于不同的矇脫土含量,材料性能測試錶明:2%矇脫土所對應的納米複閤材料的力學性能和流變性能最好.文中選取瞭矇脫土質量分數為2%的複閤材料以超臨界二氧化碳為髮泡劑進行微孔髮泡,泡孔形態分析錶明:矇脫土在髮泡過程中起成覈劑的作用,增加瞭PLA髮泡材料的泡孔密度,減小泡孔呎吋.
통과쌍라간제출궤용융혼합제비취유산/몽탈토납미복합재료,연구료납미복합재료역학성능、류변성능화결정성능.XRD화TEM측시결과표명:몽탈토이삽층결구분산재복합재료중.대우불동적몽탈토함량,재료성능측시표명:2%몽탈토소대응적납미복합재료적역학성능화류변성능최호.문중선취료몽탈토질량분수위2%적복합재료이초림계이양화탄위발포제진행미공발포,포공형태분석표명:몽탈토재발포과정중기성핵제적작용,증가료PLA발포재료적포공밀도,감소포공척촌.