特种铸造及有色合金
特種鑄造及有色閤金
특충주조급유색합금
SPECIAL CASTING & NONFERROUS ALLOYS
2013年
4期
365-369
,共5页
腐蚀预处理%耐磨性能%Mg2Si/Al复合材料%离心铸造
腐蝕預處理%耐磨性能%Mg2Si/Al複閤材料%離心鑄造
부식예처리%내마성능%Mg2Si/Al복합재료%리심주조
采用离心铸造制备了Al-10Si-15Mg2Si复合材料.检测了该复合材料内层颗粒增强层在未经过腐蚀处理以及经过10%的NaOH溶液在常温下不同时间的腐蚀预处理后的耐磨性能.结果表明,复合材料增强层的磨损量随着腐蚀时间的延长呈现先降低后增加的变化趋势.讨论了腐蚀预处理对复合材料颗粒增强层耐磨性能的影响机制.
採用離心鑄造製備瞭Al-10Si-15Mg2Si複閤材料.檢測瞭該複閤材料內層顆粒增彊層在未經過腐蝕處理以及經過10%的NaOH溶液在常溫下不同時間的腐蝕預處理後的耐磨性能.結果錶明,複閤材料增彊層的磨損量隨著腐蝕時間的延長呈現先降低後增加的變化趨勢.討論瞭腐蝕預處理對複閤材料顆粒增彊層耐磨性能的影響機製.
채용리심주조제비료Al-10Si-15Mg2Si복합재료.검측료해복합재료내층과립증강층재미경과부식처리이급경과10%적NaOH용액재상온하불동시간적부식예처리후적내마성능.결과표명,복합재료증강층적마손량수착부식시간적연장정현선강저후증가적변화추세.토론료부식예처리대복합재료과립증강층내마성능적영향궤제.