广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2013年
1期
39-40
,共2页
增塑剂%对硝基苯甲酸异辛酯%对硝基苯甲酸%异辛醇%对甲苯磺酸
增塑劑%對硝基苯甲痠異辛酯%對硝基苯甲痠%異辛醇%對甲苯磺痠
증소제%대초기분갑산이신지%대초기분갑산%이신순%대갑분광산
以对硝基苯甲酸和异辛醇为原料,采用颗粒状活性炭固载对甲苯磺酸作催化剂合成对硝基苯甲酸异辛酯,设计了四因素、三水平的正交实验,考察了影响反应的各种因素.实验结果表明,酯化反应的最佳条件:对硝基苯甲酸∶异辛醇=1∶2、催化剂用量为反应物酸质量的1.0%、回流温度、反应时间6h,反应原料酸质量为0.10 mol时,带水剂甲苯40mL,产率可达95.5%.
以對硝基苯甲痠和異辛醇為原料,採用顆粒狀活性炭固載對甲苯磺痠作催化劑閤成對硝基苯甲痠異辛酯,設計瞭四因素、三水平的正交實驗,攷察瞭影響反應的各種因素.實驗結果錶明,酯化反應的最佳條件:對硝基苯甲痠∶異辛醇=1∶2、催化劑用量為反應物痠質量的1.0%、迴流溫度、反應時間6h,反應原料痠質量為0.10 mol時,帶水劑甲苯40mL,產率可達95.5%.
이대초기분갑산화이신순위원료,채용과립상활성탄고재대갑분광산작최화제합성대초기분갑산이신지,설계료사인소、삼수평적정교실험,고찰료영향반응적각충인소.실험결과표명,지화반응적최가조건:대초기분갑산∶이신순=1∶2、최화제용량위반응물산질량적1.0%、회류온도、반응시간6h,반응원료산질량위0.10 mol시,대수제갑분40mL,산솔가체95.5%.