稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2013年
4期
841-844
,共4页
吕滨江%彭建%童小山%潘复生
呂濱江%彭建%童小山%潘複生
려빈강%팽건%동소산%반복생
镁合金%挤压温度%组织%力学性能
鎂閤金%擠壓溫度%組織%力學性能
미합금%제압온도%조직%역학성능
研究了不同挤压温度对Mg-2.0Zn-0.3Zr-0.9Y新型镁合金组织和性能的影响.结果表明,降低挤压温度,Mg-2.0Zn-0.3Zr-0.9Y合金的平均晶粒尺寸得到显著细化,合金的屈服强度和抗拉强度得到大幅提高,而延伸率变化不大.随着挤压温度的降低,{1012}织构强度不断增强,{0002}基面环形织构强度减弱.Mg-2.0Zn-0.3Zr-0.9Y合金的力学性能不但受到组织平均晶粒大小的影响,还受到织构分布的影响.挤压温度为330℃时可获得细小的组织和优良的力学性能,平均晶粒尺寸达到1.76 μm,合金抗拉强度达到323MPa,屈服强度为309MPa,延伸率为21.92%.
研究瞭不同擠壓溫度對Mg-2.0Zn-0.3Zr-0.9Y新型鎂閤金組織和性能的影響.結果錶明,降低擠壓溫度,Mg-2.0Zn-0.3Zr-0.9Y閤金的平均晶粒呎吋得到顯著細化,閤金的屈服彊度和抗拉彊度得到大幅提高,而延伸率變化不大.隨著擠壓溫度的降低,{1012}織構彊度不斷增彊,{0002}基麵環形織構彊度減弱.Mg-2.0Zn-0.3Zr-0.9Y閤金的力學性能不但受到組織平均晶粒大小的影響,還受到織構分佈的影響.擠壓溫度為330℃時可穫得細小的組織和優良的力學性能,平均晶粒呎吋達到1.76 μm,閤金抗拉彊度達到323MPa,屈服彊度為309MPa,延伸率為21.92%.
연구료불동제압온도대Mg-2.0Zn-0.3Zr-0.9Y신형미합금조직화성능적영향.결과표명,강저제압온도,Mg-2.0Zn-0.3Zr-0.9Y합금적평균정립척촌득도현저세화,합금적굴복강도화항랍강도득도대폭제고,이연신솔변화불대.수착제압온도적강저,{1012}직구강도불단증강,{0002}기면배형직구강도감약.Mg-2.0Zn-0.3Zr-0.9Y합금적역학성능불단수도조직평균정립대소적영향,환수도직구분포적영향.제압온도위330℃시가획득세소적조직화우량적역학성능,평균정립척촌체도1.76 μm,합금항랍강도체도323MPa,굴복강도위309MPa,연신솔위21.92%.