中国实验方剂学杂志
中國實驗方劑學雜誌
중국실험방제학잡지
CHINESE JOURNAL OF EXPERIMENTAL TRADITIONAL MEDICAL FORMULAE
2013年
10期
1-6
,共6页
门乐%鲜洁晨%洪燕龙%冯怡%王玲
門樂%鮮潔晨%洪燕龍%馮怡%王玲
문악%선길신%홍연룡%풍이%왕령
离心造粒法%微丸%辅料丸芯%制备工艺%差异性分析
離心造粒法%微汍%輔料汍芯%製備工藝%差異性分析
리심조립법%미환%보료환심%제비공예%차이성분석
目的:优选不同辅料空白丸芯的制备工艺,探索微丸母核制备工艺和制剂原料之间的适宜性.方法:采用离心造粒法分别制备微晶纤维素、淀粉、糊精和乳糖4种辅料空白丸芯,以粒径分布在0.25 ~0.355mm的丸芯得率为主要评价指标,采用单因素试验、均匀设计试验和多元线性回归统计法优化4种辅料空白丸芯的制备工艺,并分析其差异性.结果:适宜4种辅料丸芯制备的工艺参数为微晶纤维素以水为黏合剂,其他3种辅料均以50%~60%蔗糖溶液为黏合剂,喷浆速度12~16r·min-1,微晶纤维素、糊精和乳糖起母的主机转速225r·min-1,淀粉起母的主机转速275r·min-1,喷气压力0.025~0.05MPa,温度25℃,鼓风流量选小或中.结论:制备的4种不同辅料空白丸芯存在普遍适宜的工艺参数范围,研究为离心造粒法制备含药微丸的处方筛选和工艺参数优化提供参考.
目的:優選不同輔料空白汍芯的製備工藝,探索微汍母覈製備工藝和製劑原料之間的適宜性.方法:採用離心造粒法分彆製備微晶纖維素、澱粉、糊精和乳糖4種輔料空白汍芯,以粒徑分佈在0.25 ~0.355mm的汍芯得率為主要評價指標,採用單因素試驗、均勻設計試驗和多元線性迴歸統計法優化4種輔料空白汍芯的製備工藝,併分析其差異性.結果:適宜4種輔料汍芯製備的工藝參數為微晶纖維素以水為黏閤劑,其他3種輔料均以50%~60%蔗糖溶液為黏閤劑,噴漿速度12~16r·min-1,微晶纖維素、糊精和乳糖起母的主機轉速225r·min-1,澱粉起母的主機轉速275r·min-1,噴氣壓力0.025~0.05MPa,溫度25℃,鼓風流量選小或中.結論:製備的4種不同輔料空白汍芯存在普遍適宜的工藝參數範圍,研究為離心造粒法製備含藥微汍的處方篩選和工藝參數優化提供參攷.
목적:우선불동보료공백환심적제비공예,탐색미환모핵제비공예화제제원료지간적괄의성.방법:채용리심조립법분별제비미정섬유소、정분、호정화유당4충보료공백환심,이립경분포재0.25 ~0.355mm적환심득솔위주요평개지표,채용단인소시험、균균설계시험화다원선성회귀통계법우화4충보료공백환심적제비공예,병분석기차이성.결과:괄의4충보료환심제비적공예삼수위미정섬유소이수위점합제,기타3충보료균이50%~60%자당용액위점합제,분장속도12~16r·min-1,미정섬유소、호정화유당기모적주궤전속225r·min-1,정분기모적주궤전속275r·min-1,분기압력0.025~0.05MPa,온도25℃,고풍류량선소혹중.결론:제비적4충불동보료공백환심존재보편괄의적공예삼수범위,연구위리심조립법제비함약미환적처방사선화공예삼수우화제공삼고.