热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
23期
97-100,103
,共5页
Dynaform%翻边%破裂
Dynaform%翻邊%破裂
Dynaform%번변%파렬
针对圆孔翻边在成形过程中易出现破裂、起皱等缺陷的问题,采用有限元分析软件DYNAFORM对圆孔翻边成形过程中的影响因素进行了数值模拟.结果表明,板料硬化指数、板料厚度及厚向异性系数增大,均有利于翻边成形.
針對圓孔翻邊在成形過程中易齣現破裂、起皺等缺陷的問題,採用有限元分析軟件DYNAFORM對圓孔翻邊成形過程中的影響因素進行瞭數值模擬.結果錶明,闆料硬化指數、闆料厚度及厚嚮異性繫數增大,均有利于翻邊成形.
침대원공번변재성형과정중역출현파렬、기추등결함적문제,채용유한원분석연건DYNAFORM대원공번변성형과정중적영향인소진행료수치모의.결과표명,판료경화지수、판료후도급후향이성계수증대,균유리우번변성형.