电子机械工程
電子機械工程
전자궤계공정
ELECTRO-MECHANICAL ENGINEERING
2013年
1期
43-45,64
,共4页
碳纤维复合材料%深腔%锥面%成型模
碳纖維複閤材料%深腔%錐麵%成型模
탄섬유복합재료%심강%추면%성형모
碳纤维复合材料深腔壳体零件成型后,由于冷却收缩,零件会紧紧包住成型模块,造成难脱模、易变形等问题.文中结合碳纤维复合材料的性能特点,针对这些问题进行了具体的工艺成型技术分析,设计了一种镶拼式锥面结构成型模块,利用开模工具分解模块.该脱模方式操作简单可靠.模具材料选用加工性好、尺寸稳定性高、膨胀系数与碳纤维复合材料最为接近的QT-500.制造出的零件表面平滑,尺寸稳定,精度高.该模具的设计较好地解决了深腔壳体类零件脱模难的问题,同时也为同类零件的生产制造提供了一种比较新颖的成型设计方法.
碳纖維複閤材料深腔殼體零件成型後,由于冷卻收縮,零件會緊緊包住成型模塊,造成難脫模、易變形等問題.文中結閤碳纖維複閤材料的性能特點,針對這些問題進行瞭具體的工藝成型技術分析,設計瞭一種鑲拼式錐麵結構成型模塊,利用開模工具分解模塊.該脫模方式操作簡單可靠.模具材料選用加工性好、呎吋穩定性高、膨脹繫數與碳纖維複閤材料最為接近的QT-500.製造齣的零件錶麵平滑,呎吋穩定,精度高.該模具的設計較好地解決瞭深腔殼體類零件脫模難的問題,同時也為同類零件的生產製造提供瞭一種比較新穎的成型設計方法.
탄섬유복합재료심강각체령건성형후,유우냉각수축,령건회긴긴포주성형모괴,조성난탈모、역변형등문제.문중결합탄섬유복합재료적성능특점,침대저사문제진행료구체적공예성형기술분석,설계료일충양병식추면결구성형모괴,이용개모공구분해모괴.해탈모방식조작간단가고.모구재료선용가공성호、척촌은정성고、팽창계수여탄섬유복합재료최위접근적QT-500.제조출적령건표면평활,척촌은정,정도고.해모구적설계교호지해결료심강각체류령건탈모난적문제,동시야위동류령건적생산제조제공료일충비교신영적성형설계방법.