现代制造工程
現代製造工程
현대제조공정
MODERN MANUFACTURING ENGINEERING
2013年
2期
1-5
,共5页
苏刚%陈建魁%尹周平%徐洲龙
囌剛%陳建魁%尹週平%徐洲龍
소강%진건괴%윤주평%서주룡
平压装置%燃料电池膜电极%静力分析%模态分析%优化设计
平壓裝置%燃料電池膜電極%靜力分析%模態分析%優化設計
평압장치%연료전지막전겁%정력분석%모태분석%우화설계
为满足燃料电池膜电极等柔性电子器件的生产工况,对一种精密平压装置进行了建模和有限元分析,提出了优化模型.首先,对装置模型进行静力学分析,根据变形和应力分布情况,提出零/部件形状和尺寸优化的目标.其次,通过对部分组件的形状优化分析,获知其形状的优化趋势.再次,对装置模型进行模态分析,结果表明,装置的1阶固有频率较低,确定了对装置模态影响较大的组件.最后,设计了一种整体结构的优化方案,该方案在满足燃料电池膜电极生产工况要求的同时,使平压装置减重达10%,1阶固有频率提高约9%.
為滿足燃料電池膜電極等柔性電子器件的生產工況,對一種精密平壓裝置進行瞭建模和有限元分析,提齣瞭優化模型.首先,對裝置模型進行靜力學分析,根據變形和應力分佈情況,提齣零/部件形狀和呎吋優化的目標.其次,通過對部分組件的形狀優化分析,穫知其形狀的優化趨勢.再次,對裝置模型進行模態分析,結果錶明,裝置的1階固有頻率較低,確定瞭對裝置模態影響較大的組件.最後,設計瞭一種整體結構的優化方案,該方案在滿足燃料電池膜電極生產工況要求的同時,使平壓裝置減重達10%,1階固有頻率提高約9%.
위만족연료전지막전겁등유성전자기건적생산공황,대일충정밀평압장치진행료건모화유한원분석,제출료우화모형.수선,대장치모형진행정역학분석,근거변형화응력분포정황,제출령/부건형상화척촌우화적목표.기차,통과대부분조건적형상우화분석,획지기형상적우화추세.재차,대장치모형진행모태분석,결과표명,장치적1계고유빈솔교저,학정료대장치모태영향교대적조건.최후,설계료일충정체결구적우화방안,해방안재만족연료전지막전겁생산공황요구적동시,사평압장치감중체10%,1계고유빈솔제고약9%.