福建林学院学报
福建林學院學報
복건림학원학보
JOURNAL OF FUJIAN COLLEGE OF FORESTRY
2013年
4期
363-366
,共4页
X-射线衍射%超轻质材料%纤维素%结晶区%热稳定性
X-射線衍射%超輕質材料%纖維素%結晶區%熱穩定性
X-사선연사%초경질재료%섬유소%결정구%열은정성
X-ray diffraction%ultra-low density material%cellulose%crystalline region%thermal stability
纤维素结晶区的热稳定性对超轻质木纤维发泡材料(ULDM)的阻燃性能有关键影响作用.提高纤维素结晶区的有序程度和结晶度,材料的阻燃性能相应获得提高.在氮气保护下,对未阻燃处理、无机复合阻燃剂各组分分别单独阻燃处理和复合阻燃剂阻燃处理的ULDM试样分别热处理到指定温度,通过X-射线衍射(XRD)法分析纤维素结晶区随温度变化的趋势和阻燃剂各组分对结晶区的影响.结果表明:复合阻燃剂的酸脱水成炭作用和硅化合物与碳链形成的化学键结合提高了纤维索结晶区的有序性和结晶度,纤维素结晶区的完全热解破坏温度由400℃提高到500℃以上.经阻燃处理后纤维素结晶区热解过程是逐步降解,防止了由于结晶区的瞬间热解崩溃而发生爆燃的现象.
纖維素結晶區的熱穩定性對超輕質木纖維髮泡材料(ULDM)的阻燃性能有關鍵影響作用.提高纖維素結晶區的有序程度和結晶度,材料的阻燃性能相應穫得提高.在氮氣保護下,對未阻燃處理、無機複閤阻燃劑各組分分彆單獨阻燃處理和複閤阻燃劑阻燃處理的ULDM試樣分彆熱處理到指定溫度,通過X-射線衍射(XRD)法分析纖維素結晶區隨溫度變化的趨勢和阻燃劑各組分對結晶區的影響.結果錶明:複閤阻燃劑的痠脫水成炭作用和硅化閤物與碳鏈形成的化學鍵結閤提高瞭纖維索結晶區的有序性和結晶度,纖維素結晶區的完全熱解破壞溫度由400℃提高到500℃以上.經阻燃處理後纖維素結晶區熱解過程是逐步降解,防止瞭由于結晶區的瞬間熱解崩潰而髮生爆燃的現象.
섬유소결정구적열은정성대초경질목섬유발포재료(ULDM)적조연성능유관건영향작용.제고섬유소결정구적유서정도화결정도,재료적조연성능상응획득제고.재담기보호하,대미조연처리、무궤복합조연제각조분분별단독조연처리화복합조연제조연처리적ULDM시양분별열처리도지정온도,통과X-사선연사(XRD)법분석섬유소결정구수온도변화적추세화조연제각조분대결정구적영향.결과표명:복합조연제적산탈수성탄작용화규화합물여탄련형성적화학건결합제고료섬유색결정구적유서성화결정도,섬유소결정구적완전열해파배온도유400℃제고도500℃이상.경조연처리후섬유소결정구열해과정시축보강해,방지료유우결정구적순간열해붕궤이발생폭연적현상.