焊管
銲管
한관
WELDED PIPE AND TUBE
2013年
10期
51-55
,共5页
刘冬%李荣锋%邱保文%杜丽影
劉鼕%李榮鋒%邱保文%杜麗影
류동%리영봉%구보문%두려영
管线钢%止裂韧性%裂纹尖端张开角%高韧性
管線鋼%止裂韌性%裂紋尖耑張開角%高韌性
관선강%지렬인성%렬문첨단장개각%고인성
pipeline steel%toughness arrest%crack tip opening angle%high toughness
裂纹尖端张开角(CTOA)已被应用于高韧性管线钢的止裂韧性评定。简要介绍了裂纹尖端张开角CTOA的定义,详细介绍了目前使用较广的4种CTOA测试方法,即稳态撕裂时直接测量法(光学显微和数值图像相关方法)、试验后测量(显微形貌法)、有限元法和通过δ5间接测量法,并对这几种方法的适用性及存在的问题进行了探讨,为CTOA测试方法的推广应用及今后进一步的丰富与完善打下了基础。
裂紋尖耑張開角(CTOA)已被應用于高韌性管線鋼的止裂韌性評定。簡要介紹瞭裂紋尖耑張開角CTOA的定義,詳細介紹瞭目前使用較廣的4種CTOA測試方法,即穩態撕裂時直接測量法(光學顯微和數值圖像相關方法)、試驗後測量(顯微形貌法)、有限元法和通過δ5間接測量法,併對這幾種方法的適用性及存在的問題進行瞭探討,為CTOA測試方法的推廣應用及今後進一步的豐富與完善打下瞭基礎。
렬문첨단장개각(CTOA)이피응용우고인성관선강적지렬인성평정。간요개소료렬문첨단장개각CTOA적정의,상세개소료목전사용교엄적4충CTOA측시방법,즉은태시렬시직접측량법(광학현미화수치도상상관방법)、시험후측량(현미형모법)、유한원법화통과δ5간접측량법,병대저궤충방법적괄용성급존재적문제진행료탐토,위CTOA측시방법적추엄응용급금후진일보적봉부여완선타하료기출。
The crack tip opening angle(CTOA) has already been used for toughness arrest assessment in high toughness pipeline steel. In this paper,it briefly introduced the definition of CTOA,detailedly introduced four CTOA test methods commonly used at present,including the direct measurement method when steady-state tear(optical microscopic and numerical image correlation method),measurement after test(microscopic morphology method),finite element method and indirect method of measurement th-roughδ5. It also discussed the applicability and the existed problems,which lay the foundation for popularization and application and improvement of the CTOA measurement method.