现代机械
現代機械
현대궤계
MODERN MACHINERY
2014年
2期
77-80
,共4页
AZ31B%激光合金化%显微组织%显微硬度%耐磨损性能
AZ31B%激光閤金化%顯微組織%顯微硬度%耐磨損性能
AZ31B%격광합금화%현미조직%현미경도%내마손성능
针对镁合金表面耐磨性差,采用预置粉末法对AZ31B表面进行激光合金化Al-SiC粉末实验.使用光学显微镜和扫描电子显微镜(SEM)、能谱分析仪(EDS)、摩擦磨损试验机、显微硬度计对合金化涂层的微结构、相组成及性能进行了分析研究.结果表明,强化层与基体呈冶金结合、组织均匀致密;合金化层主要由Mg17Al12、SiC、Mg2Si、Al4C5Al2O3等相组成.涂层的显微硬度、耐磨损性能都明显高于基体.
針對鎂閤金錶麵耐磨性差,採用預置粉末法對AZ31B錶麵進行激光閤金化Al-SiC粉末實驗.使用光學顯微鏡和掃描電子顯微鏡(SEM)、能譜分析儀(EDS)、摩抆磨損試驗機、顯微硬度計對閤金化塗層的微結構、相組成及性能進行瞭分析研究.結果錶明,彊化層與基體呈冶金結閤、組織均勻緻密;閤金化層主要由Mg17Al12、SiC、Mg2Si、Al4C5Al2O3等相組成.塗層的顯微硬度、耐磨損性能都明顯高于基體.
침대미합금표면내마성차,채용예치분말법대AZ31B표면진행격광합금화Al-SiC분말실험.사용광학현미경화소묘전자현미경(SEM)、능보분석의(EDS)、마찰마손시험궤、현미경도계대합금화도층적미결구、상조성급성능진행료분석연구.결과표명,강화층여기체정야금결합、조직균균치밀;합금화층주요유Mg17Al12、SiC、Mg2Si、Al4C5Al2O3등상조성.도층적현미경도、내마손성능도명현고우기체.