广东石油化工学院学报
廣東石油化工學院學報
엄동석유화공학원학보
JOURNAL OF MAOMING COLLEGE
2013年
3期
4-7
,共4页
直馏航煤%吸附精制%脱硫醇%吸附剂%复合氧化锌
直餾航煤%吸附精製%脫硫醇%吸附劑%複閤氧化鋅
직류항매%흡부정제%탈류순%흡부제%복합양화자
straight-run jet fuel%adsorb-refining%demercaptan%adsorbents%complex zinc oxide
随着原油的含硫量增加,直馏航空煤油馏分中的硫醇硫随之增加,原有的精制工艺已出现或潜在许多问题,如硫醇硫含量超标、博士试验不合格等质量问题,需进一步发展完善以适应生产需要。直馏航煤精制脱硫醇的方法有加氢法、催化氧化法和吸附法等。文章在自主安装的试验装置,进行静态及动态吸附试验研究。通过静态吸附试验,在13种吸附剂中选定复合氧化锌作为吸附剂。在此基础上,考察了吸附剂结构形状对吸附精制效果的影响。试验结果表明,粉状吸附剂脱除硫醇硫质量百分率最高(98.1%),粒状次之(34.9%),条状最差(21.8%);内扩散阻力是影响吸附过程的重要因素。
隨著原油的含硫量增加,直餾航空煤油餾分中的硫醇硫隨之增加,原有的精製工藝已齣現或潛在許多問題,如硫醇硫含量超標、博士試驗不閤格等質量問題,需進一步髮展完善以適應生產需要。直餾航煤精製脫硫醇的方法有加氫法、催化氧化法和吸附法等。文章在自主安裝的試驗裝置,進行靜態及動態吸附試驗研究。通過靜態吸附試驗,在13種吸附劑中選定複閤氧化鋅作為吸附劑。在此基礎上,攷察瞭吸附劑結構形狀對吸附精製效果的影響。試驗結果錶明,粉狀吸附劑脫除硫醇硫質量百分率最高(98.1%),粒狀次之(34.9%),條狀最差(21.8%);內擴散阻力是影響吸附過程的重要因素。
수착원유적함류량증가,직류항공매유류분중적류순류수지증가,원유적정제공예이출현혹잠재허다문제,여류순류함량초표、박사시험불합격등질량문제,수진일보발전완선이괄응생산수요。직류항매정제탈류순적방법유가경법、최화양화법화흡부법등。문장재자주안장적시험장치,진행정태급동태흡부시험연구。통과정태흡부시험,재13충흡부제중선정복합양화자작위흡부제。재차기출상,고찰료흡부제결구형상대흡부정제효과적영향。시험결과표명,분상흡부제탈제류순류질량백분솔최고(98.1%),립상차지(34.9%),조상최차(21.8%);내확산조력시영향흡부과정적중요인소。