计算机集成制造系统
計算機集成製造繫統
계산궤집성제조계통
COMPUTER INTEGRATED MANUFACTURING SYSTEMS
2013年
3期
577-587
,共11页
李鹏%马孜%陈余庆%胡英
李鵬%馬孜%陳餘慶%鬍英
리붕%마자%진여경%호영
加工中心%在线检测%非接触检测%接触式检测
加工中心%在線檢測%非接觸檢測%接觸式檢測
가공중심%재선검측%비접촉검측%접촉식검측
为了提高加工中心对复杂工件尺寸的检测效率,提出一种新的加工中心在线复合式检测设计方案,该方案着重论述了检测系统结构、工作原理及软件实现方法等内容.首先基于非接触和接触式检测原理,设计了可以集成于加工中心刀库的复合嵌入式检测装置;进而提出复合式检测的判据,在工件加工过程中,针对不同的检测要求选用不同检测方式,既满足了加工件各特征的检测精度要求,又缩短了工件的整体加工检测周期,提高了在线检测效率;最后通过复合式检测数据融合和后处理数据分析,给出工件特征的加工质量分析报告.为了检验该方案的可行性,以步距规为检测对象,根据步距规的使用参数和精度特征,经复合式检测后,生成了二维和三维工件特征的检测结果,证明了该设计方案的合理性,为加工中心在线检测技术提供了一种新的方法.
為瞭提高加工中心對複雜工件呎吋的檢測效率,提齣一種新的加工中心在線複閤式檢測設計方案,該方案著重論述瞭檢測繫統結構、工作原理及軟件實現方法等內容.首先基于非接觸和接觸式檢測原理,設計瞭可以集成于加工中心刀庫的複閤嵌入式檢測裝置;進而提齣複閤式檢測的判據,在工件加工過程中,針對不同的檢測要求選用不同檢測方式,既滿足瞭加工件各特徵的檢測精度要求,又縮短瞭工件的整體加工檢測週期,提高瞭在線檢測效率;最後通過複閤式檢測數據融閤和後處理數據分析,給齣工件特徵的加工質量分析報告.為瞭檢驗該方案的可行性,以步距規為檢測對象,根據步距規的使用參數和精度特徵,經複閤式檢測後,生成瞭二維和三維工件特徵的檢測結果,證明瞭該設計方案的閤理性,為加工中心在線檢測技術提供瞭一種新的方法.
위료제고가공중심대복잡공건척촌적검측효솔,제출일충신적가공중심재선복합식검측설계방안,해방안착중논술료검측계통결구、공작원리급연건실현방법등내용.수선기우비접촉화접촉식검측원리,설계료가이집성우가공중심도고적복합감입식검측장치;진이제출복합식검측적판거,재공건가공과정중,침대불동적검측요구선용불동검측방식,기만족료가공건각특정적검측정도요구,우축단료공건적정체가공검측주기,제고료재선검측효솔;최후통과복합식검측수거융합화후처리수거분석,급출공건특정적가공질량분석보고.위료검험해방안적가행성,이보거규위검측대상,근거보거규적사용삼수화정도특정,경복합식검측후,생성료이유화삼유공건특정적검측결과,증명료해설계방안적합이성,위가공중심재선검측기술제공료일충신적방법.