热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2013年
11期
49-51,54
,共4页
刘岚洁%陈光耀%张钊%鲁雄刚%李重河
劉嵐潔%陳光耀%張釗%魯雄剛%李重河
류람길%진광요%장쇠%로웅강%리중하
BaZrO3%TiFe%TiNi%冶炼%界面反应
BaZrO3%TiFe%TiNi%冶煉%界麵反應
BaZrO3%TiFe%TiNi%야련%계면반응
BaZrO3%TiFe%TiNi%melting%interface reaction
以TiO2作为助熔剂,采用等静压成型技术配合固相烧结技术制备了BaZrO3坩埚,并用制备的BaZrO3坩埚采用真空感应熔炼技术进行了TiM(M=Fe,Ni)熔炼试验.通过对熔炼后的合金铸锭与坩埚的界面区域进行的宏观分析、SEM微观形貌观察、EDS分析,发现熔体对坩埚不造成侵蚀,坩埚材料也不污染熔体,熔体与坩埚内壁之间无明显反应层存在.这将给BaZrO3耐火材料用作坩埚材料的TiFe和TiNi合金的真空感应熔炼工艺提供理论支持.
以TiO2作為助鎔劑,採用等靜壓成型技術配閤固相燒結技術製備瞭BaZrO3坩堝,併用製備的BaZrO3坩堝採用真空感應鎔煉技術進行瞭TiM(M=Fe,Ni)鎔煉試驗.通過對鎔煉後的閤金鑄錠與坩堝的界麵區域進行的宏觀分析、SEM微觀形貌觀察、EDS分析,髮現鎔體對坩堝不造成侵蝕,坩堝材料也不汙染鎔體,鎔體與坩堝內壁之間無明顯反應層存在.這將給BaZrO3耐火材料用作坩堝材料的TiFe和TiNi閤金的真空感應鎔煉工藝提供理論支持.
이TiO2작위조용제,채용등정압성형기술배합고상소결기술제비료BaZrO3감과,병용제비적BaZrO3감과채용진공감응용련기술진행료TiM(M=Fe,Ni)용련시험.통과대용련후적합금주정여감과적계면구역진행적굉관분석、SEM미관형모관찰、EDS분석,발현용체대감과불조성침식,감과재료야불오염용체,용체여감과내벽지간무명현반응층존재.저장급BaZrO3내화재료용작감과재료적TiFe화TiNi합금적진공감응용련공예제공이론지지.