CAJ | 학술논문

通过测量在不同空气/水流量、不同安装角度下，插孔式分配器各出口液相流体的流量，得到两相流体流量、安装角度对分流器性能的影响。由实验结果可得：当两相流体流量增加时，插孔式分流器的性能变好；当插孔式分配垂直安装时，分流性能最好；当倾斜安装时，分流性能变差。当倾斜角度在0?~30?时，随着倾斜角度的增加，不均匀度平缓增加；当倾斜角度在30?~90?时，随着倾斜角度的增加，不均匀度增大的速率变大。
통과측량재불동공기/수류량、불동안장각도하，삽공식분배기각출구액상류체적류량，득도량상류체류량、안장각도대분류기성능적영향。유실험결과가득：당량상류체류량증가시，삽공식분류기적성능변호；당삽공식분배수직안장시，분류성능최호；당경사안장시，분류성능변차。당경사각도재0?~30?시，수착경사각도적증가，불균균도평완증가；당경사각도재30?~90?시，수착경사각도적증가，불균균도증대적속솔변대。
The liquid flow rate of each outlet of jack-type distributor is measured under test conditions of different air/water flow rates and different installation angles to know the influence of two-phase flow rate and installation angle on the performance of distributor. From the experimental results, it can be known that, the performance becomes better as the two-phase flow rate increases; the performance gets the best when it is vertically installed; the performance gets worse when it is inclined installed. When the installation angle is between 0°~30°, the unevenness increases gradually as installation angle increases; while when the installation angle is between 30°~90°, the increase rate of unevenness becomes bigger as installation angle increases.