燕山大学学报
燕山大學學報
연산대학학보
JOURNAL OF YANSHAN UNIVERSITY
2013年
3期
201-205
,共5页
黄超伟%王敏婷%刘东旭%张静%王俊杰%丁艳
黃超偉%王敏婷%劉東旭%張靜%王俊傑%丁豔
황초위%왕민정%류동욱%장정%왕준걸%정염
大锻件%动态再结晶%晶粒尺寸%混晶
大鍛件%動態再結晶%晶粒呎吋%混晶
대단건%동태재결정%정립척촌%혼정
heavy forging%dynamic recrystallization%austenite grain size%mixed grain
充分考虑初始晶粒度的影响,通过 Gleeble-3500热模拟压缩试验,研究了大锻件材料35CrMo 钢的高温成形特性。利用金相试验,建立了包含变形温度、应变、应变速率和初始晶粒度四因素的35CrMo 钢动态再结晶百分数和晶粒尺寸模型,该模型的建立为后续混晶形成规律研究提供必要理论基础。
充分攷慮初始晶粒度的影響,通過 Gleeble-3500熱模擬壓縮試驗,研究瞭大鍛件材料35CrMo 鋼的高溫成形特性。利用金相試驗,建立瞭包含變形溫度、應變、應變速率和初始晶粒度四因素的35CrMo 鋼動態再結晶百分數和晶粒呎吋模型,該模型的建立為後續混晶形成規律研究提供必要理論基礎。
충분고필초시정립도적영향,통과 Gleeble-3500열모의압축시험,연구료대단건재료35CrMo 강적고온성형특성。이용금상시험,건립료포함변형온도、응변、응변속솔화초시정립도사인소적35CrMo 강동태재결정백분수화정립척촌모형,해모형적건립위후속혼정형성규률연구제공필요이론기출。
Hot deformation characteristics of heavy forging steel 35CrMo are studied through Gleeble-3500 thermal-mechanical simulation tests under the condition of different initial austentite grain size. Dynamic recrystallization fraction models and grain size models of steel 35CrMo are established using Gleeble-3500 simulator by determining the deformation temperature, strain, strain rate and initial austentite grain size. These results provide theoretical basis for the subsequent study of mixed grain.